I was wondering if the Apexi N1 dual exhuast sustem will bolt up to a Racing Beat down pipe or will i have to get an Apexi down pipe??

 

I believe you will need to have a custom adaptor pipe made to mate them as the RB Downpipe is made for use with their presilencer.

 

if you have the RB dp and presilencer it will work. if you do not have the presilencer there will be about an 18" long gap in the piping. if the N1 is used, there will be very little difference in noise either way

 

It also depends on if he as the REV-TII Downpipe or the regular 2.5 inch downpipe.

 

In the past I had the old version RB downpipe and presilencer mated to an N1 catback. It all bolted up with no problems.

I can't speak to if it will fit on the rev II version.

 

as long as it's not the REVII system everything is designed to bolt right up at the stock locations.