i was jus wonderin were is a good place to order sum apex seals from?

 

local mazda dealership parts department

 

how much do they usually go for? and is there like a write up on how to change them?

 

mazdatrix also sells seals.......

 

there will be write ups...search for "rebuild writeup"

or purchase the DIY-13B video......

or visit Atkins Rotary.....

 

You mean an engine rebuild?

I have a topic in the Archives that covers the assembly of the engine in my 2nd gen. It does not cover the disassembly and preparation work though.

The seals themselves are available at Mazda or any of the vendors. If you are unsure of aftermarket seals, get the factory seals.

 

you may want to consider having a place like rotary resurection do it for you, its not a simple job.

 

buy some coolant seals too

 

I've never bought them, dont know what they go for. i THINK around $200 for the set? They are not the type of thing you can just replace by themselves. You will have to pull the engine, completely dissasemble it and rebuild it and replace every engine seal. Bad apex seals = blown engine. Your best bet is to find someone close to rebuild it or send it off to be rebuilt (looking at around 1000-2500).

 

but mazdatrix is like $10 per seal more expensive than everyone else.

malloy mazda is a good one.

 

depending on where you shop, usually ~$52-66 each