anyone know how to install a fuel cut switch?
#3
Senior Member
Thread Starter
Join Date: Jan 2003
Location: franklin, MA
Posts: 345
Likes: 0
Received 0 Likes
on
0 Posts
fuel cut switch
i mean whatever would help stop gasoline from getting in the oil...i asked a question about that and someone told me to install a "fuel cut switch"...i don't know how so i had to ask, thanks
#4
Round&Round not Up&Down
Join Date: Aug 2001
Location: West Bloomfield, MI
Posts: 2,805
Likes: 0
Received 0 Likes
on
0 Posts
#5
fuel cut switch for when it's off or if it floods.
if it's for when it floods and u want to burn out the fuel so u can restart it.............. you find the injector fuse under the hood, cut the wire running to it, and put a switch in that line, i did it and it works wonders. plus if u have leaky injectors, and it floods while it sits, it will take care of it. all i used was speaker cable and a toggle switch i bought at an auto parts store. only took 10-15 minutes, i mounted it underneath the steering wheel.
if it's for when it floods and u want to burn out the fuel so u can restart it.............. you find the injector fuse under the hood, cut the wire running to it, and put a switch in that line, i did it and it works wonders. plus if u have leaky injectors, and it floods while it sits, it will take care of it. all i used was speaker cable and a toggle switch i bought at an auto parts store. only took 10-15 minutes, i mounted it underneath the steering wheel.
#7
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
There's no need to go all the way to the EFI fuse, there's a much easier way. Go to this thread, scroll to the bottom and read my fuel pump switch how-to.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
armans
3rd Generation Specific (1993-2002)
5
08-15-15 09:08 PM