DCmina

Hi, I am almost done installing them but now I need to connect the electrical stuff.
Can anyone tell me where the red and black wires go?

I'm gonna try and make a diagram:
.._____......._____
./_/_/_/___/_/_/_/
/_/_/_/_/._/_/_/_/

Thanks!

MazdaRx7Racer4Life

red go to a positive, and black go to a negative.

MazdaRx7Racer4Life

I hooked mine up to the radio remote positive, so when I turn off the oignition in my car, the indiglos shut off by themselves

DCmina

Thanks but I still got no idea where that is.
Could you tell me where in my diagram to put the red and black wires?
thanks

MazdaRx7Racer4Life

if you have a test light, hook it up to a good ground and star testing your wires, anything that lights up with the ignition on should work.

DCmina

Thanks, I'll try...
but if you could tell me just where to put them

Icemark

are the red and black wires the only wires coming from the indiglow gauge faces or controller??

TurboSmoke

i have a set of reverse indiglo ones i have to figure out

DCmina

yes
thanks

TurboSmoke

what kind of gaudges are they

Icemark

Then if you want them to come on when the ignition is on, hook the red one to the Black/yellow at the back of the cluster or Black/white at the ignition switch.

If you want them to come on with the lights, hook the red wire to the red/black wire found at the radio, or light switch, or CPU in the drivers kick panel, or the glove box light,

The black wire should go to one of the solid black (or black with dots) wires coming from the cluster.

TurboSmoke

on the instructions on my car it said do not attach to fact dimmers could blow them up. which is the wire for the dimmers so i dont attach them

Icemark

The factory dimmer wires are Red/green. That should not be used for a indiglow type gauge cover!!!

DCmina

Here are the ones I got
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1853317311

I put the red one in the red/black from the cluster and the black on black. Now it's on all the time. Oh well, It has a dimmer switch so that I can turn it off.

Man that S-AFC is gonna be a nightmare to install!

Thanks a lot!!

TurboSmoke

here are the ones i got

DCmina

I like them too but they are pricey!!

TurboSmoke

i only payed 50 for mine

Icemark

you can't get that red/black from the cluster, as I said on my post There is no red/black at the cluster. Only a red/white (which is the feed from the high beam relay or the oil level sensor depending on what plug), and the above mentioned red/green that you should not use unless you want your indiglow gauges to burn out with too little voltage.