Anyone have experience with Centerforce clutches?
#1
Hopeful Future
Thread Starter
Join Date: Oct 2005
Location: Orlando, FL
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Anyone have experience with Centerforce clutches?
Specifically the dual friction. Looking into a clutch replacement, and the idea of increased holding capacity while maintaining a close to stock pedal feel has me intrigued.
Anyone ever used this clutch and can speak for it? Worth it? Or is it one of those cases of trying to have your cake and eat it too.
Anyone ever used this clutch and can speak for it? Worth it? Or is it one of those cases of trying to have your cake and eat it too.
#3
rotorhole
centerforce clutches never seemed that great to me, unless you like a heavy and chunky clutch that barely performs better than the other performance counterparts. just go with ACT and forget CF. clutch pedal feel with the ACT clutches i've put in were virtually the same as OEM.
Last edited by insightful; 10-17-17 at 10:56 AM.
#4
Hopeful Future
Thread Starter
Join Date: Oct 2005
Location: Orlando, FL
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
#5
Stock pedal pressure is very light, there is no ACT offered that feels like stock. The Centerforce is a good choice if you are on a tight budget.
Clutch choice decision needs to be made by determining how much HP & torque you plan to make. For example : Selecting a cheap clutch and expecting it to hold 500hp for any length of time is asking a lot.
Clutch choice decision needs to be made by determining how much HP & torque you plan to make. For example : Selecting a cheap clutch and expecting it to hold 500hp for any length of time is asking a lot.
#6
RX-7 Old Timer
Honestly, I could not tell the difference in pedal force between stock TII and the ACT HD pressure plate. Perhaps I'm feeling old grease vs fresh grease, but it is not a stiff clutch. My wife's Focus ST has a stiffer OEM clutch.
#7
rotorhole
i couldn't much tell the difference either, i don't know what banzai is smoking unless he only installs stage 3 clutches.
Trending Topics
#8
Not smoking anything. There is only ACT HD and XT, no such thing as a "stage 3".
The stock Exedy almost falls to the floor without pressing the pedal. I have customers in their 60-70s that are original owners, we have had to remove ACT HD pressure plates because of the increased pedal pressure.
The stock Exedy almost falls to the floor without pressing the pedal. I have customers in their 60-70s that are original owners, we have had to remove ACT HD pressure plates because of the increased pedal pressure.
#10
rotorhole
any upgrade is going to cost something, i still am not a big fan of how massive and bulky the centerforce is. i also assume with the way it works based on centrifugal force weights that it also gets rather heavy with high RPMs.
#11
Senior Member
Are you referring to the exedy stage 1 turbo clutch? how does stage 1 compare to the stage 1 heavy duty(exedy claims 25% stronger) in pedal feel...is that still lighter then the act HD pressure plates? Or anyone else that has a direct comparison of these 3 clutches as far as pedal effort.
Last edited by Nosferatu; 10-23-17 at 02:53 PM.
#12
Are you referring to the exedy stage 1 turbo clutch? how does stage 1 compare to the stage 1 heavy duty(exedy claims 25% stronger) in pedal feel...is that still lighter then the act HD pressure plates? Or anyone else that has a direct comparison of these 3 clutches as far as pedal effort.
#13
Always Wanting to Learn
iTrader: (49)
I drove an ACT pressure plate and can confirm that it takes more pressure to push the pedal than an Exedy pressure plate for sure, using my old Turbo FB for an example.
#15
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
I had a Centerforce Dual Friction clutch in my Turbo II, and it is a really great clutch for a street/autocross car with a mildly-modified turbo engine. The light pedal force allows for faster gear changes in my opinion, and you will not wear out your leg as much in heavy stop-and-go traffic. However, it is really important to have it installed by a competent mechanic because there is a high probability for a noob to install it incorrectly, which typically causes failure of the weights or release bearing.
My experience with this and other clutches is as described earlier by Banzai-Racing, especially the part about choosing the right clutch based on the torque of the engine.
My experience with this and other clutches is as described earlier by Banzai-Racing, especially the part about choosing the right clutch based on the torque of the engine.
#16
Moderator
iTrader: (3)
Join Date: Mar 2001
Location: https://www2.mazda.com/en/100th/
Posts: 30,841
Received 2,605 Likes
on
1,848 Posts
Not smoking anything. There is only ACT HD and XT, no such thing as a "stage 3".
The stock Exedy almost falls to the floor without pressing the pedal. I have customers in their 60-70s that are original owners, we have had to remove ACT HD pressure plates because of the increased pedal pressure.
The stock Exedy almost falls to the floor without pressing the pedal. I have customers in their 60-70s that are original owners, we have had to remove ACT HD pressure plates because of the increased pedal pressure.