As title states, any way to get hold of this? I only need one with some 5-10 inches of wires so I can splice it into my harness.

My plug was made of melted plastic by p/o. So I would love a proper plug so I can connect my coils and all again!

 

you are going to have to look in the classified section for a harness.

Or you can go to a junkyard and try and source the plugs from one of these cars
http://www.diyautotune.com/diybob/index.html

Its under DIYBOB N76 (Nippon Denso Style 76 pin)

 

I need the 22 pin I guess, the one to the right on the ECU. Supplies coils amongst others. Ignition too if Im not mistaken, Pins are 1A-1V.

Buying the whole harness is just stupid, way too expensive and very unnecessary...

 

So you need the right-most ecu connector?

 

.

 

Yes, the middle one size-wise. 24-pin, 10-pin, 22-pin. I need the 22-pin.

 

FRONT harness plug on the ECU is the far right side of the ECU.

 

Yeap, as I said. The one to the far right, the second largest plug (number of pins).

 

Just added the jpg above as an assist to you. Not disagreeing at all.

Only reason for helping.............it's sooooo rare that someone calls the Front harness the ...Front harness.

This bumped your post to the top again.

 

Wait!..you want an S5 connector with wires?
I have a scrap ECU harness,so it has the ECU Connectors still on it..Is THAT what you are looking for?.I can cut whatever you want off of it,I got the fuel connectors already though.
Norway..oh boy..(Ya,I'll ship..you pay though.)

 

i feel soo glad i grabbed the one of these in the junk yard.... i regret i've stole soo many pins out of it... oh well.