plainandsimpo

http://cgi.ebay.com/ebaymotors/INTER...QQcmdZViewItem


wells i came accross this intercooler kit on ebay ..and im wondering if its anygood/? have anyone tried it.? and im bout to go bnr stage three soon im wonderin if its good enough for the stock turbo and the bnr 3 thanks guuys

sharingan 19

iTrader: (16)

The piping is certainly big enough. The IC will definitely be an upgrade over stock.

texFCturboII

iTrader: (17)

well it is important i realize that you cannot just throw in a stage 3 BNR turbo and call it a day. Just because it is a direct bolt on does not mean that you can just install it and let it boost away! (besides the necessary oil lines to the compressor). With more air you need more fuel, and a way to control that fuel to air ratio. you probably already know this, but I'm just making sure that another perfectely good 13bt isn't destroyed. I hope you are running bigger injectors and at least an s-afc if not a standalone! I'm glad you are looking at intercoolers, but that is just part of turbo management.

plainandsimpo

hahah thanks for the replys ....and TEXFCTURBOII =) thanks for feeding me the info....and i think i should have told you guys my mods b4 askin bout the intercooler
here it is ...........rtek 1.8 ......800cc primary / secondary .....racing beat full tb ...stage 2 streetport and cheap custom air intake oh yea the engine only has about 4k on it lol still a fresh rebuilt ....act clutch..... oh yea and ported the s4 turbo wastegate.....thats about it ........all i can think of ........oh yea i still have rats nest ..about to remove it wen im not lazy lol i have the block off plates ......and thats it i think .. lol


im thinkin about going bnr stage 3 with the intercooler i started the post with ....witch is this http://cgi.ebay.com/ebaymotors/INTER...QQcmdZViewItem
and im also getting apexi neo from my brother/... i was about to go rtek 2.0 but hey the apex neo is free lol im just hopeing this set up is alright ...........any of you guys have any opinion ....ideas ....anything??? ..... i thinkin between 10 to 14 psi with stage 3 how much you think ill get to the wheel lol welps thanks i hope you guys got soemthing for me lol !!!

RETed

This is not a drop-in fit.

You realize the stock turbo outlet is only 2.0"?
You need a reducer to fit to the 2.5" pipe.


-Ted

BlueTII

Also that is not a drop-in , there will be a bunch of cutting, welding and bead rolling, just to get the piping right.

plainandsimpo

hmm not a drop in fit...so you guys have any other ebay pipes you guys recomend that i dont have to cut or customise to fit ...or something close ...i kno some of the pple on this forum have done it .....thanks

Substance*D

i bought an ebay fmic kit like that along time ago, dont plan on boosting more than 10psi without Bead-rolled pipes and REAL silicon couplers. Once, my boost spiked to 15psi and blew a coupler to pieces.

arghx

iTrader: (3)

just get the corksport kit. it's like $800 i think