Another quick injector question
#1
Drive.
Thread Starter
Join Date: Oct 2002
Location: Washington, North Carolina
Posts: 1,676
Likes: 0
Received 1 Like
on
1 Post
Another quick injector question
Ok, I don't see any reason you couldn't do this but just asking to make sure. I have an 88 tII that i'm upgrading to larger secondary injectors. As of now I'm planning on going with a pair of 680's from a gsl-se (low imp). From what you guys are telling me...all I need to do is wire in a 10w 10ohm resitor in the line coming of the ecu to the 2 injectors to make them high imp.
Now, the question is...I heard that you're not suppose to run mixed injectors...meaning high imp. in the primaries (stock 550's) and the new 680's in the secondaries (low...wired over to high). I was told i'd need to do 4 680's and wire them all to high. Is this true, or am I safe just wiring the 2 680's over to high imp. and leaving the 550's alone? I don't understand why I would need to change all 4, but maybe I'm missing something. Anyway, enlighten me.
Now, the question is...I heard that you're not suppose to run mixed injectors...meaning high imp. in the primaries (stock 550's) and the new 680's in the secondaries (low...wired over to high). I was told i'd need to do 4 680's and wire them all to high. Is this true, or am I safe just wiring the 2 680's over to high imp. and leaving the 550's alone? I don't understand why I would need to change all 4, but maybe I'm missing something. Anyway, enlighten me.
#3
I R SAD PANDA W/O BAW
You can mix them it's perfectly fine and tons of people have done it. Just make sure you have the resistors soldered in on the correct wires for the secondaries.
#5
Banned. I got OWNED!!!
Join Date: Mar 2005
Location: SF CALI
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by NZConvertible
Also make sure you have some sort of fuel control to tune those injectors down a bit, or you'll just run bulk rich and loose power.
#6
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
The factory mixtures are already very rich and you think making it 12% richer is okay? Excessively rich mixtures are not a good thing. Just because you've done it, doesn't mean it's the right way to do something.
Last edited by NZConvertible; 04-21-05 at 03:48 AM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM