This is not going to be my 1st product, but I'm still wondering.

Which product would you rather see.

A solid TII hood. I peice, with the "vent" or whatever that's called molded into the hood.

or

A TII hood, with the "vent" removable. And along with this, different "vent" peices. Such as a Stock TII vent, a solid vent, and maybe an RE*Amemiya-ish vented... vent

 

Oh yeah, also. If we decide to turn out the 2-peice, the optional vents will be seperate items. I'll try to get pics of the vents I have in mind.

 

Would these be CF, Alum, or steal? Id have to say 2 piece with interchangable vents. more options the better.

 

*steel

These would be in either FG or CF, your choice.
These are PLANNED for down the road, don't get to uppity folks, I'm not promising anything. Just trying to lay out a plan.

1st thing produced will probably be CF FTP Vents, because it's a nice, inexpensive thing to make, that will accent red and black cars very well. Plus, will look better than having nothing in the FTP hole.


The "vented... vent" mentioned before. Or something like this.

 

so there is no chance of getting a STOCK hood?

 

any pics of those FTPs vents?

 

not yet. That's just our 1st project. We will probably start on them within the next 2 weeks. So, expect a picture in 2 weeks or so.

 

And Pinfield.... short answer, no.

There will be a stock TII hood in some form, and a vented hood. If you have an N/A, just get the vented hood. It'll gain performance, and not just looks from spending the $$ for a CF hood. Even still, that's in the future.

 

i was just asking cause i have a turbo 2 and wanted a hood with a functional scoop

 

So far the options have it... but there's still quite a bit of time left.

Funding should be in soon. And my friend is coming over tomorrow to mull over plans and such. We'll see how it goes Looks VERY good tho'

 

is the vented (1st one) functional w/ stock intercooler??

 

I'll try to make it exactally as functional as the stock one. But I'll probably do the same with the other, and only include the rubber "gasket" that will go around the intercooler if you order the stock scoop along with the hood. If you order the flat, or vented scoop, it would be un-needed.

 

i dont understand all this can someone explain all the jargon

 

TII hoods stock = 2 peice; the hood, and the scoop (vent)

I plan to make a hood where either 1) it is once peice; the scoop is molded into the hood, and not removable. 2) the hood is 2 peice (like stock) ad make different scoops (vents) to put in the opening.

 

both sound awsome and diff