I would like to run a BNR stage 2 turbo safely... Can i do it? My mods are on my sig.. thanks Steve

 

Is anyone else running a Stage 2, if so whats your set up??

 

Go for it dude, keep boost at 10 psi.

 

just wondering why only a stage 2 for only a few more dollars you can go with a bigger one just curious

 

Maybe he wants some better spool?

 

I'm still new and learning about turbos. I dont want to be another guy with a turbo upgrade and a blown motor! I want to make sure i have the support for a turbo upgrade. As i think i dont have the fuel or ECU yet for stage 3?
It does sound nice for $50 dollars more the get the stage 3,

Could i get one and just keep the boost down?? until i go Microtech, and upgrade the injectors???

 

You could get the biggest turbo there, as long as you keep the boost down and the AFRs safe.

 

Your injectors are big enough. How big is that FMIC? Get a fuel pressure regulator, and make sure your clutch is capable of handling the HP. With your setup as long as the engine is fresh and u have the right amount of fuel with a decent FMIC u should be able to go stage 3 and boost 10 to 12 lbs. You will be making well over 300 whp. Remember the clutch tho as u will be burning a stock one VERY quickly with that setup.

 

over 300 wheel at 10 lbs on a BNR stage 3? Not very likely unless you feed some pretty good advance into that thing.

 

what is the "stock" boost level for the S5 BNR stage 3? by stock, i mean with the wastegate line plumbed like stock, no boost controller