2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

All lights on....

Thread Tools
 
Search this Thread
 
Old May 21, 2007 | 04:33 PM
  #1  
Rx7TyreBurna's Avatar
Thread Starter
Becoming pure track...
Tenured Member 15 Years
iTrader: (1)
 
Joined: Feb 2005
Posts: 1,069
Likes: 0
From: Olympia, WA
All lights on....

Well, all my idiot lights are staying on. It started doing that before I did a tear down of my wiring and everything. But I was hoping it was a bad ground somewhere.

I know that it just sort of happened out of no where. I went out to my car one day and started it and all the lights were on in the idiot cluster. I parked my car and proceeded to do a ton of work. And now when I just put my key to ACC. All the lights stay on and don't turn off. Is this a sign of a dying ECU?

I am also getting no click or anything when I attempt to start my car. I turn the key to start and it doesn't do anything. No click, or anything.

Any info would be great! Thanks!
Reply
Old May 21, 2007 | 11:34 PM
  #2  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
bad alternator or you have disconnected the wires to the CPU (not ECU).

CPU = body computer
ECU = engine computer
Reply
Old May 21, 2007 | 11:49 PM
  #3  
Rx7TyreBurna's Avatar
Thread Starter
Becoming pure track...
Tenured Member 15 Years
iTrader: (1)
 
Joined: Feb 2005
Posts: 1,069
Likes: 0
From: Olympia, WA
Location of CPU? I know where the ECU is, but I haven't heard of the CPU..

Thanks.
Reply
Old May 21, 2007 | 11:52 PM
  #4  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
next to the fuse box in the drivers kick panel.. I have posted a picture countless times
Reply
Old May 22, 2007 | 12:20 AM
  #5  
Rx7TyreBurna's Avatar
Thread Starter
Becoming pure track...
Tenured Member 15 Years
iTrader: (1)
 
Joined: Feb 2005
Posts: 1,069
Likes: 0
From: Olympia, WA
That's alright. I wouldn't expect you to. I think I know where it is. I will take a look.

Thanks.
Reply
Old May 22, 2007 | 12:33 AM
  #6  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
why are you even looking there first???

What is the voltage on the voltmeter in your dash?
Reply
Old May 22, 2007 | 01:22 PM
  #7  
Rx7TyreBurna's Avatar
Thread Starter
Becoming pure track...
Tenured Member 15 Years
iTrader: (1)
 
Joined: Feb 2005
Posts: 1,069
Likes: 0
From: Olympia, WA
I messed around in there a bit when I pulled my dash out to install my alarm system.

Anywho, I figured out the problem. Or, maybe not. With the key in ON position, all the idiot lights go on. But, when I start the car, they all go off. No longer going on in ACC anymore.

I think a ground didn't get connected.

Thanks!
Reply
Old May 22, 2007 | 10:33 PM
  #8  
Icemark's Avatar
Former Moderator. RIP Icemark.
 
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
no, not a ground... The relay in the CPU that turns the lights on, gets signal from the ignition switch and the alternator... if either fail, the relay does not kick on, and you get the idiot lights on.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JoesFC
2nd Generation Specific (1986-1992)
9
Oct 5, 2015 08:10 AM
The1Sun
1st Generation Specific (1979-1985)
7
Sep 18, 2015 07:13 PM
The1Sun
New Member RX-7 Technical
5
Sep 15, 2015 04:45 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM




All times are GMT -5. The time now is 09:21 AM.