Aftermarket coolant reservoir
#1
White Comet
Thread Starter
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket coolant reservoir
Does HKS or Cusco make one? The reason im looking for one is id like to relocate mine behind the radiator because its currently underneath the shroud. Any ideas? Thanks guys.
Trending Topics
#8
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
There's bound to be a few aftermarket generic replacements, or you could look in a few other engine bays until you find one that suits, then either buy it new from the dealer or check out a wrecker. Plastic always looks shitty when old, so the newer the better.
#9
Open up! Search Warrant!
Join Date: May 2002
Location: Kicking down doors in a neighborhood near you
Posts: 3,838
Likes: 0
Received 2 Likes
on
2 Posts
since we are on the subject, how fast will a 1qt oil catch can fill up if I connect it to my PCV line? Just a ball park figure. Will I have to drain it once a week, once a month, once every 6 months?
#14
Mod Powers...gone!
Join Date: Apr 2001
Location: SoCal
Posts: 1,522
Likes: 0
Received 0 Likes
on
0 Posts
Ni5mo180SX,
It may be difficult to find a metal coolant reservoir tank. There is a reason why they usually are made of plastic. Heat. Metal conducts heat. And a metal coolant reservoir tank will absorb the heat from your engine bay and also retain the heat from the coolant itself.
I did find this metal overflow tank by Summit.
http://store.summitracing.com/produc...earchtype=ecat
It may be difficult to find a metal coolant reservoir tank. There is a reason why they usually are made of plastic. Heat. Metal conducts heat. And a metal coolant reservoir tank will absorb the heat from your engine bay and also retain the heat from the coolant itself.
I did find this metal overflow tank by Summit.
http://store.summitracing.com/produc...earchtype=ecat
Last edited by DomFD3S; 06-30-03 at 09:34 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ZaqAtaq
New Member RX-7 Technical
2
09-05-15 08:57 PM