after that streetable "teenager" FC
03-23-06, 03:39 PM
#26
Originally Posted by First gen man
If not I acually know a guy local that has an HKS log manifold with external. So If boost creep is a problem I'll buy that, and run an open wastegate muwhaha.
open wastegate? what, you mean NO wastegate?
and explain to me how the HKS manifold with T4 flange will bolt up to your Hitachi T-18 turbo?
03-23-06, 03:45 PM
#28
Originally Posted by First gen man
I'm not really worry about what other kids are doing, I'm just out to prove a point that there ****'s weak lol..
03-23-06, 06:58 PM
#29
We are the D
Join Date: Nov 2005
Location: Indianapolis
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
What everyone was saying about standalones...dont think that you have to go out and spend 800+ on a standalone ECU, MegaSquirt id like $200 (somewhere around there) and if you know how to solder and follow directions, this is by far the cheapest standalone out there. And not at the expense of quality, either. Its good sh*t
03-23-06, 07:11 PM
#31
I'd just place the maf in the ic piping biatch! get a safc and tune it from there... a additional fuel injector controller could work also but you dont always have to go stand alone... I have a microtech system in my car fully modded thinking the car wouldnt be that bad on gas... well I was wrong very very very wrong
03-23-06, 07:28 PM
#32
We are the D
Join Date: Nov 2005
Location: Indianapolis
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by skir2222
I'd just place the maf in the ic piping biatch! get a safc and tune it from there... a additional fuel injector controller could work also but you dont always have to go stand alone... I have a microtech system in my car fully modded thinking the car wouldnt be that bad on gas... well I was wrong very very very wrong
03-23-06, 07:40 PM
#33
Boost in..Apex seals out.
Join Date: Nov 2003
Location: Maryland, 21794
Posts: 1,931
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JoshRX7
Boost creep will be a problem when you add the huge TID and huge exhaust. Just to let you know... porting the wastegate will not eliminate it all.
Josh
Josh
03-24-06, 02:56 AM
#34
yessir
Thread Starter
iTrader: (24)
Join Date: May 2005
Location: Sebring FL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by classicauto
open wastegate? what, you mean NO wastegate?
and explain to me how the HKS manifold with T4 flange will bolt up to your Hitachi T-18 turbo?
and explain to me how the HKS manifold with T4 flange will bolt up to your Hitachi T-18 turbo?
*cut and weld the hitach flange to the hks log*
03-24-06, 02:59 AM
#35
yessir
Thread Starter
iTrader: (24)
Join Date: May 2005
Location: Sebring FL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by classicauto
their **** is weak? but they run 12's???? sorry I don't quite understand the logic here.........
Yes, there **** is weak, gangsterd up honda's and factory cars with the boost turned up sucks..
and the people around hear think there the ****...
Last edited by First gen man; 03-24-06 at 03:00 AM. Reason: type-o's
03-24-06, 03:16 AM
#37
Rotor7ven
Join Date: Jun 2005
Location: kissimmee, fl
Posts: 338
Likes: 0
Received 0 Likes
on
0 Posts
theres alot of hondas here to but no1 tries me i guess they scared of the power of the rx-7!!!!!!!!!!!! when i drive my car i see alot of honda people breaking there necks looking at my ca like if it was a damn bugatti. but they kno that they cant mess wit rotary. but they dont kno that i have a n/a rx-7 either lol
03-24-06, 09:22 AM
#38
Banned. I got OWNED!!!
There's a couple Honda's around here that would be a run for me, but for some reason none of them want to race me... They just say "Naahhh man I'm not racing that ****, it's an RX-7!" lol... Then I simply say "The Seven can't lose!!!" and go on about my way... 
Oh and FWIW, please don't weld the HT-18 flange to the HKS manifold... If you're gonna do that, just get one of the SSAC stainless manifolds for the stock S4 turbo (assuming you have a S4)...
Oh and FWIW, please don't weld the HT-18 flange to the HKS manifold... If you're gonna do that, just get one of the SSAC stainless manifolds for the stock S4 turbo (assuming you have a S4)...
03-25-06, 12:36 AM
#40
yessir
Thread Starter
iTrader: (24)
Join Date: May 2005
Location: Sebring FL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 13b4me
Oh and FWIW, please don't weld the HT-18 flange to the HKS manifold... If you're gonna do that, just get one of the SSAC stainless manifolds for the stock S4 turbo (assuming you have a S4)...
ya, thats really what the idea was.
03-25-06, 05:38 PM
#45
Defected to the dark side
Join Date: Aug 2003
Location: toronto
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by First gen man
I understand this, I am going to do that. Start off with a street ported motor running on the stock ecu and such get it to run perfect, get some monitoring items, then go into making it faster. This project will be more to the reliable and fast side. Not exactly cheap, but I'll be on the stock turbo and stock ECU.
03-26-06, 11:05 PM
#46
yessir
Thread Starter
iTrader: (24)
Join Date: May 2005
Location: Sebring FL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wankels-Revenge
Reliable and fast don't exactly walk hand in hand...especially on an fc. If you are gonna be tuning for speed, get every gauge u can think of and be extra **** on keeping an eye on everything.
You can make around 300 whp, pretty reliably. With the right equipment.
03-26-06, 11:19 PM
#47
Your Rx7 with a street-port, full exhaust/intake, FMIC, ported WG, 720cc secondaries, FCD, MBC and an SAFC running 10psi (creeping up a bit) will be pretty fast and fun, but don't count on running in the 12's.
To hit 12's you'll have to push into the "second stage" of mods which usually include a larger turbo (whether hybrid or full) and an EMS with tuning. You will be a good run on the street with a lot of those turbo'd Honda's that run in the high-12's with slicks, but don't count on beating them... Also, you should 'walk' stock SRT-4's.
To hit 12's you'll have to push into the "second stage" of mods which usually include a larger turbo (whether hybrid or full) and an EMS with tuning. You will be a good run on the street with a lot of those turbo'd Honda's that run in the high-12's with slicks, but don't count on beating them... Also, you should 'walk' stock SRT-4's.
03-26-06, 11:23 PM
#48
yessir
Thread Starter
iTrader: (24)
Join Date: May 2005
Location: Sebring FL
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
the srt-4 hear are nasty for some reason, i hate them, but they run 12's some how.
around hear srt-4's > evo's. (evos suck too, but they lost more respect when a local evo and srt 4 raced and the srt4 won by about 3 cars)
but you probly speek the truth, im hopeing for low 13's, 12's but im sure i wont make it, you never really do on the first try.
around hear srt-4's > evo's. (evos suck too, but they lost more respect when a local evo and srt 4 raced and the srt4 won by about 3 cars)
but you probly speek the truth, im hopeing for low 13's, 12's but im sure i wont make it, you never really do on the first try.
03-26-06, 11:33 PM
#49
Originally Posted by eriksseven
Your Rx7 with a street-port, full exhaust/intake, FMIC, ported WG, 720cc secondaries, FCD, MBC and an SAFC running 10psi (creeping up a bit) will be pretty fast and fun, but don't count on running in the 12's.
To hit 12's you'll have to push into the "second stage" of mods which usually include a larger turbo (whether hybrid or full) and an EMS with tuning. You will be a good run on the street with a lot of those turbo'd Honda's that run in the high-12's with slicks, but don't count on beating them... Also, you should 'walk' stock SRT-4's.
To hit 12's you'll have to push into the "second stage" of mods which usually include a larger turbo (whether hybrid or full) and an EMS with tuning. You will be a good run on the street with a lot of those turbo'd Honda's that run in the high-12's with slicks, but don't count on beating them... Also, you should 'walk' stock SRT-4's.