This is ColumbusTurboII

So we just put a race ported motor into my car after a rebuild obviously.

we are trying to get her started up and the AFM reading on the SAFC reads ~45% and when foot is off the pedal just sitting it should be at 0.4%


the car will start and even tho it is floored it won't go past 1000 rpms and die shortly after 4 seconds.

any way you guys test the AFM that might help us see if its a wiring issue or a sensor issue?

btw yesterday the AFM readings were fine when we started her up.

 

tell you what, send me the motor and i will test it with my AFM and tell you if it works or not.