2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Advice needed on seats

Thread Tools
 
Search this Thread
 
Old Oct 1, 2002 | 07:44 PM
  #1  
DoubleDown's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 49
Likes: 0
From: Irvine CA
Advice needed on seats

Either my seats need to be re-upholstered, or I replace them. When I talk to shops about buying either Recaros or Sparcos, nobody is clear on whether adapters are available, or if I need to have my own fabricated etc.

Anyone have any advice? I don't want to put a lot of money into this.

thanks,

Rex
Reply
Old Oct 1, 2002 | 08:09 PM
  #2  
vaughnc's Avatar
knowledge junkie
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 5,595
Likes: 6
From: Atlanta, GA
Must be nice living next to the Mazda headquarters

This has been covered before. Do a search for recaros, sparcos, etc.. in this section and 2nd gen archive for more.
Reply
Old Oct 1, 2002 | 08:10 PM
  #3  
TonyTurboII's Avatar
Glock Lover
Tenured Member 20 Years
 
Joined: Mar 2001
Posts: 2,223
Likes: 0
From: Currently residing in St Charles, MO
Most seat companies have seat rails for FCs. I assume thats what your talking about. Make sure the seats your looking at arent too wide either.
Reply
Old Oct 1, 2002 | 08:15 PM
  #4  
Cheers!'s Avatar
Former Rx7 *****
Tenured Member 15 Years
 
Joined: Nov 2001
Posts: 4,534
Likes: 0
From: Mississauga
vaughnc, what happened to those seat covers about 3 months back?
Reply
Old Oct 1, 2002 | 09:35 PM
  #5  
vaughnc's Avatar
knowledge junkie
Tenured Member 10 Years
 
Joined: Mar 2001
Posts: 5,595
Likes: 6
From: Atlanta, GA
funny you should ask. I just received a disposable camera that is suppose to contain pics of the OSA covers the one guy bought. (we'll see anyway). Got to get them developed first of course.

While at sevenstock, someone was recommending a process of reconditioning leather that sounded interesting (not the "leather repair kits" as seen on TV).

Of course my first words were "write up." Mabey he'll actually do it.
Reply
Old Oct 2, 2002 | 03:38 AM
  #6  
schexy1's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Jan 2002
Posts: 105
Likes: 0
From: Albuquerque
You should be able to get both seats reupholstered for around $300 - $350, Thats what I have been quoted.
Reply
Old Oct 2, 2002 | 05:00 AM
  #7  
Junior Member
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 36
Likes: 0
From: Auckland, New Zealand
the recaro rails are no longer available for the FC
Reply
Old Oct 2, 2002 | 09:35 AM
  #8  
DoubleDown's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 49
Likes: 0
From: Irvine CA
thanks guys for the advice.
Reply
Old Oct 2, 2002 | 10:16 AM
  #9  
JumpyRoo's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Oct 2001
Posts: 690
Likes: 0
From: Chicago area
If I'm correct, and I may not be, sports seat companies use a universal bracketing measurement/size. That is to say that the bolt patterns on the bottom of the seat are consistant.

That said, Sparco actually makes brackets for the FC. And they don't have any in stock. The *make* them by the order, so it takes a while (like, two months, a while) if your dealer doesn't have them on shelf, and most certainly, they don't. But I'm waiting on my own right now for that very application.
Reply
Old Oct 2, 2002 | 10:58 AM
  #10  
DoubleDown's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Sep 2002
Posts: 49
Likes: 0
From: Irvine CA
sparco brackets

thanks. What does FC mean? I keep seeing it all over the website but this is only my second day here.

thanks.
Reply
Old Oct 2, 2002 | 11:03 AM
  #11  
Prowla RX7's Avatar
It's Whatever
Tenured Member 10 Years
 
Joined: Sep 2001
Posts: 105
Likes: 0
From: Ft Laud, FL
FC = 2nd generation RX-7... basically part of the vin number

you'll see it mentioned in each generation as FB or SA22C is a 1st gen, FC is 2nd gen and FD is 3rd gen
Reply
Old Oct 2, 2002 | 11:04 AM
  #12  
rx_7_driver's Avatar
Senior Member
Tenured Member 10 Years
 
Joined: Apr 2002
Posts: 717
Likes: 0
From: New Orleans, Louisiana
FC= 2nd gen rx-7 (86-91)
s4 (series 4)= 86-88
s5 (series 5)= 89-91
fb= 1st gen
fd= 3rd gen

-shawn


edit: beat me to it
Reply
Old Oct 2, 2002 | 12:37 PM
  #13  
Full Member
Tenured Member 05 Years
 
Joined: Mar 2002
Posts: 169
Likes: 0
From: Utah
You should just get 2002 Celica GTS leather buckets for your ride. That's what I have, and they fix in the car nicely.

As for brackets tho... be prepared to make your own adapters.... but hey... they look nice once you finally get them in...

I would show pics.. .but I got a new fc and haven't taken the time to put the seats in this one yet.

Fikshun
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
Sep 2, 2015 09:42 PM
CynicalGambit
New Member RX-7 Technical
0
Aug 17, 2015 10:41 PM




All times are GMT -5. The time now is 05:52 PM.