2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

ADD coolant

Thread Tools
 
Search this Thread
 
Old Jan 14, 2009 | 11:53 PM
  #1  
t2 boost brotha's Avatar
Thread Starter
Senior Member
Tenured Member 10 Years
 
Joined: Nov 2006
Posts: 255
Likes: 0
From: san francisco
ADD coolant

hey guys so im getting my car warmed up and i pull off im crusing for about 12 blocks and then bzzzzzzzzzzzzzzz the add coolant light comes on so i instanly cut it off. wait a while and then i popede the hood. i look at the ressovore and the ***** filled to the top i let it sit for a minute then take off. i road slow like at 20mph ANOTHER 18 blocks home no buzzin at all. wats up with this??
Reply
Old Jan 15, 2009 | 06:56 AM
  #2  
plainandsimpo's Avatar
Brrap braapp..
Tenured Member: 15 Years
Liked
 
Joined: Aug 2006
Posts: 178
Likes: 0
From: Oakland
wait till if cools off open all the coolant caps and fill em up...then open your reservoir
and fill it up to where it says full ...you dont have to fill it to the top or eles it'll be forced back out.. see if it works...

if not..iono
Reply
Old Jan 15, 2009 | 09:10 AM
  #3  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Bleed the cooling system once the car cools down, and replace the pressure cap and hose from it to the overflow reservoir.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
Oct 7, 2015 08:12 PM
musker
New Member RX-7 Technical
1
Oct 1, 2015 05:58 PM




All times are GMT -5. The time now is 06:25 PM.