Actuatimg the aux ports via air pump
#1
Rotary > Piston
Thread Starter
Join Date: Sep 2003
Location: Texas - Victoria
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Actuatimg the aux ports via air pump
Ok, i have searched for a long time, and found some good information, just not exactly what i was looking for. I tried the writeup at fces.org, but theirs is only for hooking everything up with an extra electronic air pump, and it explains what parts i need for my job, just not exactly how to do it. I have a 88 NA and i need to figure out how exactly to hook up my stock air pump so that it will actuate the aux. ports at the needed time. I have searched a lot and found a typical statement : if you do some searching you should be able to find what you need" well i did and i didnt. im pretty new here so please no flaming, i just need to know how to get this done, as i am having a custom no-cat exhaust done as soon as i can figure it out.
Thanks in advance -
Thanks in advance -
#2
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
https://www.rx7club.com/forum/showth...hreadid=121833
And if that doesn't help here are a list of threads involving the topic.
https://www.rx7club.com/forum/search...der=descending
And if that doesn't help here are a list of threads involving the topic.
https://www.rx7club.com/forum/search...der=descending
#3
Rotary Freak
iTrader: (5)
Join Date: Jun 2002
Location: Va
Posts: 1,549
Likes: 0
Received 0 Likes
on
0 Posts
I just did this, I got my information from Kevin [ Rotary Ressurection} site. I got my parts from advance auto. Basicly just hook tubing to both acuators and allow one tube for venting, I used a vacuum restrictor i.e. orface where kevin used a valve johny
Last edited by zooooom; 09-28-03 at 09:35 AM.
#4
Registered Loser
iTrader: (6)
Join Date: Dec 2002
Location: Whiterock
Posts: 2,224
Likes: 0
Received 0 Likes
on
0 Posts
Drill a hole in your ACV dump pipe (it comes out facing the fender. Take the tube from the pipe that goes to the cat and glue it in the hole. It works perfect. If you need I can upload a picture.
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
12abridgeport
1st Generation Specific (1979-1985)
2
08-17-15 06:28 PM