AC&CV removal problem
Thread Starter
Joined: Dec 2001
Posts: 7,174
Likes: 236
From: Twin Cities, MN
AC&CV removal problem
I have already read most of the idle problem links using the search option.
My idle was fine then i took off my ac&cv, i used the block off plate and lots of RTV gasket maker. There is no vacuum leak there. I screwed down the idle adjustment screw on the TB all the way down. My idle is at 900-950. Whats my problem? Its got to do with the ac&cv nothing else.
My idle was fine then i took off my ac&cv, i used the block off plate and lots of RTV gasket maker. There is no vacuum leak there. I screwed down the idle adjustment screw on the TB all the way down. My idle is at 900-950. Whats my problem? Its got to do with the ac&cv nothing else.
Thread
Thread Starter
Forum
Replies
Last Post
Devon300zx
2nd Generation Specific (1986-1992)
15
Sep 16, 2015 06:57 AM
risingsunroof82
1st Generation Specific (1979-1985)
8
Sep 7, 2015 01:11 PM