Instead of PM'ing everybody that has asked about when I was going to get tranny mounts made to go with the solid motor mounts... I got the 89-91 TII's covered now. I have others soon to follow.

 

cool, let me know when you have S4 N/A tranny mounts made up, and I'll almost definitely buy them from you.

 

How much?

 

$25 per set with bolt kit plus $5 U.S. (mainland shipping)

 

Is it bad to use soild tranny mounts with the rubber/poly engine mounts?

 

I just got to thinking, is there any difference in the N/A and T-II tranny mounts? They look about the same size. I would imagine it's the crossmember where they differ...no?

 

I would have to check for myself but I was told they are different. So until I either get a mount to check or put an 89-91 NA on my lift and look I can't answer it.
The guy that told me is a reliable source so I took his word for it.
He is supposed to come up with a mount or measurements for the NA. We are going to cover the R100, RX2, RX3, RX4, Cosmo, REPU, first gen, and second gen. The third gen is just too weird to mess with

Another project you 2 gen'ers will like is a differential "bumper" replacement. I am setting it up to make the installation as painless as possible. It has two main functional pieces. One bolts to the same place on the diff as a stock one and the second piece preloads the diff as you tighten the bolts.
I promise you guys will love it and feel a big difference.

 

I checked at Mazdaformance.com, and apparently every tranny mount 86-91 is the same. They don't differentiate at all.

However, no word of the crossmember...which is what I would expect to be different.

So if it's $25/set, let me know how to purchase, and I will

 

$25 + $5.50 shipping. PayPal is mikeroberts@charter.net Be sure to put RX7Club in the note box. If you need snail mail info PM me.
It may just be a crossmember issue but I can't verify that yet.

 

thanks. Yeah, I'll just double check that it's all the same, but it appears that it may be. Once I'm confident, you'll be hearing from me