88 RX7 non turbo - miss & shake
#1
Newbie
Thread Starter
Join Date: Jul 2002
Location: Lake Orion, MI
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
88 RX7 non turbo - miss & shake
Hello everyone,
I have look thru all FAQ and did (at least I believe) what I could to find my miss. I have changed - plugs, wires, fuel filter. Looked @ all ground wires in engine bay.
When I attach timing light I can see the miss - timing light flashes are corresponding with the miss. I tried different computer, coil packs & crank angle sensor. It still has the miss and shake. Can someone help me?
I have look thru all FAQ and did (at least I believe) what I could to find my miss. I have changed - plugs, wires, fuel filter. Looked @ all ground wires in engine bay.
When I attach timing light I can see the miss - timing light flashes are corresponding with the miss. I tried different computer, coil packs & crank angle sensor. It still has the miss and shake. Can someone help me?
#2
Locust of the apocalypse
Join Date: Apr 2003
Location: Directly above the center of the earth (York, PA)
Posts: 2,553
Likes: 0
Received 1 Like
on
1 Post
Vaccume Leak Spray carb cleaner around at varous points.. when engine dies... you got it.. The vaccume spider for the oil injectors is a biggie.. its down under the intake manifold... and it turns into hard plastic from the engine heat over time..
also.. damn near every second gen with over 100k miles on it that I've torn apart has had the passenger side engine mount torn in half.
also.. damn near every second gen with over 100k miles on it that I've torn apart has had the passenger side engine mount torn in half.
#3
Rotartist
iTrader: (13)
Join Date: Sep 2003
Location: Spring Hill TN 37174
Posts: 7,252
Likes: 0
Received 2 Likes
on
2 Posts
LAke orion......my father in law lives there.......They have a kick *** 4th of july fireworks show there...My father in laws name is mark kring....Know him...? he drives a big *** blue turbo chevy 4x4....Good luck..
Thread
Thread Starter
Forum
Replies
Last Post