88 gxl warning chime gone. help!
#1
Miata *****
Thread Starter
Join Date: Feb 2009
Location: Riverside
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
88 gxl warning chime gone. help!
So just recently I went to my car. And when you turn on the lights with no key in ignition, it didn't chime or anything. Where would I locate the chime or chime assembly. Where could I start looking is probably a better question. Or any suggestions as to any fuses or relays that could possibly be the cause to this problem?
#2
MECP Certified Installer
The CPU in the driver kick panel. What mazda calls the "Horn" circuit board in the ECU will go bad and weird **** like chimes not working, high beams not working and in verts, alarms not working.
You can get that replacement board at mazdatrix and just replace just that component, instead of having to buy a whole new CPU.
http://www.mazdatrix.com/86-92Electrical-Chassis.htm <-- It's the 86-88 Horn CPU.
You can get that replacement board at mazdatrix and just replace just that component, instead of having to buy a whole new CPU.
http://www.mazdatrix.com/86-92Electrical-Chassis.htm <-- It's the 86-88 Horn CPU.
#4
Rotary Freak
I'm blessed. Of three RX only one has the chime working and it's intermittently on that one. Possible cold solder joints on the board.
Thread
Thread Starter
Forum
Replies
Last Post