87 T11-bad Hesitation At 3600rpm
05-05-02, 11:35 PM
#1
87 T11-bad Hesitation At 3600rpm
Just purchased an 87 t11 and it has bad hesitation at 3600 rpm. I feels almost like hitting fuel cut but I know it's not because it doesn't even reach full boost by then. Could it be the TPS? Can someone please help me?
05-05-02, 11:41 PM
#2
Full Member
Join Date: Apr 2002
Location: Somewhere
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
There's been so many threads on this its not funny. TRY SEARCHING FOR CHRIST SAKE!!!!
https://www.rx7club.com/forum/showth...highlight=3800
https://www.rx7club.com/forum/showth...highlight=3800
https://www.rx7club.com/forum/showth...highlight=3800
https://www.rx7club.com/forum/showth...highlight=3800
https://www.rx7club.com/forum/showth...highlight=3800
https://www.rx7club.com/forum/showth...highlight=3800
Trending Topics
05-06-02, 10:43 AM
#9
Ok let me reprhase this, when I floor it as soon as it hits 3600 under some boost it's just like basically the engine almost cuts completely out I just unhooked the TPS out of curiosity and didn't do a damn thing, still does it. What next?
05-07-02, 01:07 AM
#13
Full Member
Join Date: Feb 2002
Location: Dallas, TX
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
Guys, are you actually reading his post before you give some smart *** reply like "Use the search button." He is not having the normal 3800 rpm hesitation. He is hitting a brick wall at 3600 rpm.
It sounds like your secondary injectors aren't coming on for some reason. I'm sure someone else can give you some reasons why they wouldn't be coming on.
It sounds like your secondary injectors aren't coming on for some reason. I'm sure someone else can give you some reasons why they wouldn't be coming on.
05-07-02, 01:28 AM
#14
W. TX chirpin Monkey
Join Date: Sep 2001
Location: Mesquite, TX
Posts: 2,684
Likes: 0
Received 0 Likes
on
0 Posts
If it feels like it's hitting a brick wall....then it's probably the O2 sensor not being grounded. It grounds to the exhaust and the exhaust grounds itself to the car through a strap on the passenger side muffler. If this has been removed, more than likely this will cause your symptoms. I would check that first, mine did the same thing at 3,800 rpms. Can't Auto-X that way. Also add some grounds. Meaty ones to the car. The more the merrier. Good luck hope this helps.
05-07-02, 08:25 AM
#16
Full Member
Join Date: Nov 2001
Location: Melbourne, FL
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Ziggy682
Guys, are you actually reading his post before you give some smart *** reply
Guys, are you actually reading his post before you give some smart *** reply
If he hasn't added them, it is the first thing he must do before moving on to more expensive repairs that may not be needed.
05-07-02, 11:07 PM
#17
Yeah like the dude said it won't even rev over 3600rpm if you floor in neutral it cuts out. I have looked the O2 sensor before and there is just 1 small black wire coming from it. And about the secondaries how do I check if they are coming online or not?
05-08-02, 01:56 AM
#18
Full Member
Join Date: Apr 2002
Location: Lynnwood, WA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rexman13b
Yeah like the dude said it won't even rev over 3600rpm if you floor in neutral it cuts out. I have looked the O2 sensor before and there is just 1 small black wire coming from it. And about the secondaries how do I check if they are coming online or not?
Yeah like the dude said it won't even rev over 3600rpm if you floor in neutral it cuts out. I have looked the O2 sensor before and there is just 1 small black wire coming from it. And about the secondaries how do I check if they are coming online or not?
05-08-02, 05:39 AM
#19
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Secondaries do not open if your just sitting in the driveway reving the engine. Therefore it does not sound like the problem is secondaries not opening. Understand????? Do you have the vacuum hose connected b/t the boost/pressure sensore and the intake manifold???? Have you ohm'd out the tps sensor yet. This is one of those cases where ohming the thing out could prove to be a positive thing. Run it thru it full range with a meter looking for opens and a lack of change while doing so. Secondaries only open if there is a load detected by the boost/pressure sensor and over 3800 rpm. Unless there is somehthing disconnected like the boost/pressure sensor. Car sounds like a real dog.
Last edited by HAILERS; 05-08-02 at 05:42 AM.
05-08-02, 04:07 PM
#21
Full Member
Join Date: Apr 2002
Location: Lynnwood, WA
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by HAILERS
...does not sound like the problem is secondaries not opening. Understand?????
...does not sound like the problem is secondaries not opening. Understand?????
05-09-02, 04:51 AM
#23
Senior Member
Join Date: Jun 2001
Location: san francisco,Ca
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
i had a problem like this b4. ended up my wire harness was fried and the secondary injectors where shot. but i wouldn't start teranig down your car automatically thinkin it's your injectors. start with the little things first.
check if thingy is in vacume hose like hailers said
check for vacume leaks
check tps sensor
check map sensor
check afm
check/change spark plugs
check/change spark plug wires
check fuel pump
change fuel filter (the one on the pump too)
look for anything not plugged in (i left sumthing unplugged once)
ect. ect
if all that **** dont work then take off your upper manifold and see if there's sumthing wrong under there. aslo see if sumone has a x-tra ecu and other parts u can borrow to swap and test. u know **** like that. and take it slow and dont get fustrated. (fustration causes blindness, and arthritis) thread is getting too long now, gotta stop typing. one more thing do you have the diy fcd? if you wired up that thing wrong it can *** **** up
check if thingy is in vacume hose like hailers said
check for vacume leaks
check tps sensor
check map sensor
check afm
check/change spark plugs
check/change spark plug wires
check fuel pump
change fuel filter (the one on the pump too)
look for anything not plugged in (i left sumthing unplugged once)
ect. ect
if all that **** dont work then take off your upper manifold and see if there's sumthing wrong under there. aslo see if sumone has a x-tra ecu and other parts u can borrow to swap and test. u know **** like that. and take it slow and dont get fustrated. (fustration causes blindness, and arthritis) thread is getting too long now, gotta stop typing. one more thing do you have the diy fcd? if you wired up that thing wrong it can *** **** up
Last edited by fLyiNgOuFeR; 05-09-02 at 04:58 AM.
05-09-02, 02:45 PM
#24
I don't have a FCD don't need one yet haven't even seen full boost since I got it. Now about the orifice in the vacuum hose I took it off, didn't have one in it, but the hose with one in it off my GTU still same thing. The car does have a different exhaust on it so I'll check the ground strap for the O2 sensor could be one reason. Getting ready to change the plugs doubt it's it but it could probably use them anyway.