Well i just got a 1986 mazda rx-7 and i wanna swap the motor and get the turbo 2 motor in there i'm wondering if anyone knows what else i will need in order to do the swap .I know i'll need the ecu harness ,ecu ,tranny ,motor, but i wanna know if there is anytyhing else i might need and if anyone knows where i can get it done in southern California.This would greatly be appreciated. Thanx!



Alf

 

Search and ye shall find.

 

This thread is being closed because this topic is either covered in the FAQ or has been covered many times before. It is suggested that you make use of the search feature and read the FAQ to find your answer. If you still cannot find what you are looking for, then feel free to post your question indicating that you have already looked for an answer, and someone will probably be happy to help.

Please be aware that this forum has been around for quite a while, and almost every common question has been covered many times in the past. All this information is available by using the search function. Common questions are also already answered in the FAQ.

Some of the questions covered in the FAQ include:

-NA to Turbo conversions
-Electrical problems
-Stereo wiring
-Wheel sizes
-Stock HP and torque specs for all models
-Common abbreviations
-Common electrical problems
-much, much more

The 2nd Gen Forum also keeps an Archive of popular and informative posts. You can access this archive by using the links at the top of this forum.

Helpful links:
-FAQ: https://www.rx7club.com/forum/showthread.php?t=181219
-Search: https://www.rx7club.com/forum/search.php
-Archives: https://www.rx7club.com/forum/forumdisplay.php?f=72

Thank you,
The Moderators