86 crank pulley
10-22-05, 09:42 PM
#1
Full Member
Thread Starter
Join Date: Aug 2004
Location: bremerton
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
86 crank pulley
Is the crank pully on a 86 rx7 hard to r and r. I have a under drive pulley on right now and the charging system sucks. I have gone threw 4 alternators and all only charge at 12.00 vlts. Which I believe is to low. Any suggestion and is it very easy to change the crank pulley. rob
10-22-05, 10:17 PM
#2
Are you talking about simply removing it and replacing it with another (stock) pulley?
If so, that's really easy; (take out fan, shround, belts etc., then remove pulley)
One thing to note; the stock pulley can ONLY be put on a CERTAIN way. The 'holes' are staggered slightly.
To confirm; you want to replace your aftermarket "underdrive" pulley with a stock pulley, correct?
If so, that's really easy; (take out fan, shround, belts etc., then remove pulley)
One thing to note; the stock pulley can ONLY be put on a CERTAIN way. The 'holes' are staggered slightly.
To confirm; you want to replace your aftermarket "underdrive" pulley with a stock pulley, correct?
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
