680 injectors
#1
Damaged Little F*cker
Thread Starter
Join Date: Mar 2001
Location: High Point, North Carolina
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
680 injectors
im not sure if this is a 2nd gen or 1st gen question, but what impedance are the 680cc injectors from a GSL-SE. i can get some brand new for kinda cheap. but i need to know what impedance they are so i can run them in my 87 T2.
#2
Junior Member
Join Date: Apr 2001
Location: Daytona Beach, FL, USA
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
you sure they're 680? I always thought they were 720's. Anyway you should be able to run them fine in anything before 88 i think. They're low impedence. I'm using 680's in mine.
#4
Damaged Little F*cker
Thread Starter
Join Date: Mar 2001
Location: High Point, North Carolina
Posts: 840
Likes: 0
Received 0 Likes
on
0 Posts
thats what im asking is if i need resistors to get them to work, i dont think i do but id rather ask here and find out for sure
#5
Senior Member
Join Date: Mar 2001
Location: Lawrenceville,Georgia,U.S.
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
These are low impedance injectors. Yes, they definitely require resistors. However, you may allready have resistors in your '87 TII depending on whether it was made after June of '87 or not. Check under the air cleaner box for the assy.. If it is there and hasn't been messed with, you are ok. If it is not there, add the resistor assy. and wire it in.
Irv, Keith's dad
Irv, Keith's dad
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM