6 port opening
#1
Rotor Head
Thread Starter
Join Date: Jan 2002
Location: British Columbia
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
6 port opening
Yo- I'm gettin a Race pipe, i have a y-pipe and 2 nice low mufflers. After i get my race pipe. I will still have the main cat...Correct? The race pipe comes with a pre silencer. do you think i will have enough back pressure to keep those 6 ports opening? Or should i get a back pressure test.
Thanks guys once again
Evan
Thanks guys once again
Evan
#2
I wish I was driving!
Re: 6 port opening
Originally posted by DC350
Yo- I'm gettin a Race pipe, i have a y-pipe and 2 nice low mufflers. After i get my race pipe. I will still have the main cat...Correct? The race pipe comes with a pre silencer. do you think i will have enough back pressure to keep those 6 ports opening? Or should i get a back pressure test.
Thanks guys once again
Evan
Yo- I'm gettin a Race pipe, i have a y-pipe and 2 nice low mufflers. After i get my race pipe. I will still have the main cat...Correct? The race pipe comes with a pre silencer. do you think i will have enough back pressure to keep those 6 ports opening? Or should i get a back pressure test.
Thanks guys once again
Evan
With a cat, you will have enough backpressure.
#5
Full Member
Join Date: Feb 2002
Location: rock me amadeus...
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE Originally posted by [bnd]
The Bönez race pipe and presilencer from RX7.com replaces all the cats. It bolts up to the manifold and stock y-pipe. [/QUOTE]
that's right you will not have a cat and unless you get the n/a pipe that has the nipple for the 6 port actuation you will have to find another way to actuate them. if you did you need to just et some tubing to where they are actuated to the nipple on the pipe it needs to be the same diameter as the current stock tubing. i'd just contact who you bought it from and see how they actuate the 6 ports with the system
The Bönez race pipe and presilencer from RX7.com replaces all the cats. It bolts up to the manifold and stock y-pipe. [/QUOTE]
that's right you will not have a cat and unless you get the n/a pipe that has the nipple for the 6 port actuation you will have to find another way to actuate them. if you did you need to just et some tubing to where they are actuated to the nipple on the pipe it needs to be the same diameter as the current stock tubing. i'd just contact who you bought it from and see how they actuate the 6 ports with the system
Trending Topics
#9
Full Member
Join Date: Feb 2002
Location: rock me amadeus...
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
yess well if you have a nipply don't rub it then the tubing won't fit in there right and remember never to **** off the nipple you will not get the opening you want
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM