3800 RPM hesitation grounds
#1
3800 RPM hesitation grounds
I have the infamous 3800 hesitation on my 86 GXL. I wanted to try the cleaning/reground technique on aaroncakes.net.
I started to look around for a part number for the upper intake gasket. When looking on cochran-racing's service manual it only shows a throttle and dynaminc chamber. I am guessing this is the upper intake manifold?
So then the gasket, according to mazdamotorsports.com, would be called part # 13-116B gasket, resolution chamber.
Can someone verify this? I didnt want to order the wrong part and never use it.
Or if someone has any other suggestions to try.
thanks
I started to look around for a part number for the upper intake gasket. When looking on cochran-racing's service manual it only shows a throttle and dynaminc chamber. I am guessing this is the upper intake manifold?
So then the gasket, according to mazdamotorsports.com, would be called part # 13-116B gasket, resolution chamber.
Can someone verify this? I didnt want to order the wrong part and never use it.
Or if someone has any other suggestions to try.
thanks
#4
Senior Member
iTrader: (2)
According to Mazdatrix the gasket for the upper intake mani is
http://www.mazdatrix.com/c-2.htm
a 13-112A-N326
http://www.mazdatrix.com/c-2.htm
a 13-112A-N326
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM