300-350hp daily drivers out there?
#1
ASSOUT
Thread Starter
Join Date: Sep 2005
Location: RHINEBECK NY
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
300-350hp daily drivers out there?
hello everyone first id like to say thanx to all u guys that help us less exper. people out...........now i picked up a 87 turbo tII up with no motor but in great shape over the winter and next spring summer i plan to get this project going .....im looking for a 300 or so hp real reliable street/track car and id like in put from all how have this themselves.please no opions just facts .....things you urselves have done and or worked with or on......im gonna redo it right from top to bottom so i plan on starting this to be a big thread...AND PLEASE NO SCHOOL GIRL BICKERING....EVERYONE CAN STATE THERE OPINION.....here is some of my ideas
-gp sports body kit
-oem style carbofiber hood and sunroof
-clear bumper lens and s5 tail lights
-not sure on wing at all...........
-tein super drift or jic coilovers
-greddy 2 row fmic
-turboxs rfl
-bnr stage 3 rebuild
-looking for a jic spec 90 turbo back
-msd ignition
-the new greddy emanage ultimate-any input on this unit
-550 primaries and 1600 sec. not sure on the bes combo for what im lookin for or brand? help please.....
-fuel pump?
-fuel rail?
-mild+ port job
-3mm apex seals
-wnt to keep power steering idk about my ac yet
-intake ? emanage ultimate says it gets rid of mas
-jic seats......reclinable and clean havnt found sliders or brackets for them to my car yet....any other seats and brackets u would suggest i have wide shoulders
-all autometer gauges inside
-want a cage (bolt in preferable)must meet scca regulations...not sure where to get one
-act flywheel
-spec stage 2 clutch(came with car new in box any one use this or know if its any good or should i sell and get a act 6 puck)
-need a short throw...not sure brand or where to get it
-slotted rotors and green stuff pads and new bradied lines
-rims will be 18's wit prob 255/35 rear and 225/40 front falken 615's
im sure i forgot alot of stuff but all input is welcome really need help with the fuel and piggy back system to use and things like that
I ALSO NEED A GOOD TUNER / INSTALLER AROUND UPSTATE NEW YORK I CAN DO MOST INSTALL STUFF MYSELF BUT I NEED A GOOD TUNER....
I ALSO NEED A MOTOR JDM OR USDM IN GOOD CLEAN CONDITION RUNNIN OR NOT
-gp sports body kit
-oem style carbofiber hood and sunroof
-clear bumper lens and s5 tail lights
-not sure on wing at all...........
-tein super drift or jic coilovers
-greddy 2 row fmic
-turboxs rfl
-bnr stage 3 rebuild
-looking for a jic spec 90 turbo back
-msd ignition
-the new greddy emanage ultimate-any input on this unit
-550 primaries and 1600 sec. not sure on the bes combo for what im lookin for or brand? help please.....
-fuel pump?
-fuel rail?
-mild+ port job
-3mm apex seals
-wnt to keep power steering idk about my ac yet
-intake ? emanage ultimate says it gets rid of mas
-jic seats......reclinable and clean havnt found sliders or brackets for them to my car yet....any other seats and brackets u would suggest i have wide shoulders
-all autometer gauges inside
-want a cage (bolt in preferable)must meet scca regulations...not sure where to get one
-act flywheel
-spec stage 2 clutch(came with car new in box any one use this or know if its any good or should i sell and get a act 6 puck)
-need a short throw...not sure brand or where to get it
-slotted rotors and green stuff pads and new bradied lines
-rims will be 18's wit prob 255/35 rear and 225/40 front falken 615's
im sure i forgot alot of stuff but all input is welcome really need help with the fuel and piggy back system to use and things like that
I ALSO NEED A GOOD TUNER / INSTALLER AROUND UPSTATE NEW YORK I CAN DO MOST INSTALL STUFF MYSELF BUT I NEED A GOOD TUNER....
I ALSO NEED A MOTOR JDM OR USDM IN GOOD CLEAN CONDITION RUNNIN OR NOT
#3
Senior Member
Join Date: Feb 2004
Location: Austin, Texas
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
As long as you build up the car the right way you should be fine. Don't just slap performance mods on there and expect the car to handle the extra load no problem. Be sure to do a full tuneup on the car first, get a blown motor with good components if you can then port it when you rebuild it and do the cooling system the right way.
Aside from that get a standalone ECU and make sure its tuned right. Stay on top of the tuning and normal maintenance and you should be alright.
Don't be one of those guys that builds a 400hp car and doesn't retune when the seasons change. It's not hard to tune lean and blow the motor.
As for specifics I'd head to Ted's website www.fc3spro.com and poke around in the modifications section. Things don't have to be done in that order, but its a good place for rx7 specific info.
Aside from that get a standalone ECU and make sure its tuned right. Stay on top of the tuning and normal maintenance and you should be alright.
Don't be one of those guys that builds a 400hp car and doesn't retune when the seasons change. It's not hard to tune lean and blow the motor.
As for specifics I'd head to Ted's website www.fc3spro.com and poke around in the modifications section. Things don't have to be done in that order, but its a good place for rx7 specific info.
#7
Rotary Apprentice
Join Date: Jan 2005
Location: USA
Posts: 2,181
Likes: 0
Received 0 Likes
on
0 Posts
get a haltech or microtech, not an emanage. there will be much more support from other FC owners and from what I've heard theyre both easier to tune than an emanage.
Trending Topics
#10
Rotary Enthusiast
iTrader: (1)
Join Date: Sep 2004
Location: seattle wa
Posts: 906
Likes: 0
Received 0 Likes
on
0 Posts
i am going for the 400 hp (i may up that to 550 with nitrous)
you can build a nice motor for about 3000 with new housings hardened gears and w 3 mill seals
get a bnr stage 4 for 800
and a haltec for a 1000
injectors rc ingeneering 1600 cc 400
or som eebay knock offs for 200
and a walbro fuel pump 100
and a fmic for about a grand or a custom for 300 or so
properly built 6 grand and you will be smoking vetts
you can build a nice motor for about 3000 with new housings hardened gears and w 3 mill seals
get a bnr stage 4 for 800
and a haltec for a 1000
injectors rc ingeneering 1600 cc 400
or som eebay knock offs for 200
and a walbro fuel pump 100
and a fmic for about a grand or a custom for 300 or so
properly built 6 grand and you will be smoking vetts
#11
Full Member
Join Date: Aug 2005
Location: whiterock ,sc
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
man i'm workin on my 88 t2 w/ a 13b re i had it on the road and it did great but i put her down to tweek everything, oh yeah she should be puttin down roughly 350 hp . but my advice is dont sleep on the small stuff ( new hoses,belts,thermostat ect...)cause in my experience 9 times out of ten thats what will cost u a motor.
#12
Senior Member
Join Date: Jul 2003
Location: North Texas
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Yea, I plan to keep my FB TII project around 7k and push 35-400 easy. I cant wait for it to take off!.....first however I have to recover from buying my sister her 87 TII, giving it a full tuneup, and giving it a few mods ....when will my time ever come!?!? LoL.
#13
Rotary Reborn!
iTrader: (3)
Mine dynoed in at 410rwhp and 303rwtq at 15psi but varied on other dyno's different day.
Its not to hard to build a 400rwhp car. Problem is going above 400?
This was on a haltech e6k t04b 60-1 turbo etc etc. All it takes is money.
Go with a good fuel computer. You will be wasteing your time and money (Blown motors) if you do not address the build properly.
These motors pop on a dime with a wrong tune or build up!!!
Its not to hard to build a 400rwhp car. Problem is going above 400?
This was on a haltech e6k t04b 60-1 turbo etc etc. All it takes is money.
Go with a good fuel computer. You will be wasteing your time and money (Blown motors) if you do not address the build properly.
These motors pop on a dime with a wrong tune or build up!!!
#15
Nurse I need 1300cc's NOW
Im running right about 300 hps. its not a bad car to drive daily. in fact it made driving to work fun . except in the gas dept. I was filling up every 3-4 days and running 93 oct starts to add up. thats why i reverted back to my 4 cylinder truck. better gas mileage. I do drive about 30 miles round trip to work. so after about 3-4 day i would have to fill up. dont get me wrong. i love the power and the feel of driving it .. but i mainly use the car as a weekend cruiser/ track car. the reliablilty factor is fine. although i did have a oil pressure problem as my oil pressure control valve backed out . but thats not the car fault. it wasnt sealed with locktite. but if you take your time and build it up right you should be fine. as for 400 plus hps?? you guys pushing that mark deserve props. hehe i have about 300 and thats more than enough for me.. i actually turned my boost down. maybe once i get some more susupension upgrades ill be ready for 400 , but right now im very content with 300
#16
Full Member
Join Date: Jun 2004
Location: new orleans
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
If you are not dead set on keeping the stock motor a Ls1 swap will get you the power you want with almost no mods. I know most don't welcome this swap but it is an option. I don't want to start a pissing match I love both motors but before I lay down my cash I would look at all the options. I completed my ls1 swap for aroud 6k and it makes about 320whp on the motor and just over 400whp on nitrous and gets 25-29mpg with a/c and a smooth idle.
#18
Rotary Enthusiast
"forget about 18" wheels, go 17's." -KARACK.... I agree! plus 17 's will allow you to run some nice rubber and the fittment looks real good. I wish I had a camera or I would show . As for 18's I would say "no" as well.Good luck!-Erik
#21
ASSOUT
Thread Starter
Join Date: Sep 2005
Location: RHINEBECK NY
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by neverenough
If you are not dead set on keeping the stock motor a Ls1 swap will get you the power you want with almost no mods. I know most don't welcome this swap but it is an option. I don't want to start a pissing match I love both motors but before I lay down my cash I would look at all the options. I completed my ls1 swap for aroud 6k and it makes about 320whp on the motor and just over 400whp on nitrous and gets 25-29mpg with a/c and a smooth idle.
id love to do the ls1 swap but i cant find a parts car cheap enough and i wont do anything but an ls1 ........if u have any info and places i can find all the **** i need please let me know .............please dont get made all you rotary boys and girls out there this is my sec 7 ......i love rotarys and im lookin for a real clean na for a daily driver as we speak if any one wants to chat im on aol sn turbogunz187.....and my email is turbogunz@yahoo.com............thanx for helping me out evryone and keep it coming .......the more the better..............
#22
Full Member
Join Date: Jun 2004
Location: new orleans
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by turbogunz
id love to do the ls1 swap but i cant find a parts car cheap enough and i wont do anything but an ls1 ........if u have any info and places i can find all the **** i need please let me know .............please dont get made all you rotary boys and girls out there this is my sec 7 ......i love rotarys and im lookin for a real clean na for a daily driver as we speak if any one wants to chat im on aol sn turbogunz187.....and my email is turbogunz@yahoo.com............thanx for helping me out evryone and keep it coming .......the more the better..............