2mm vs 3mm
#1
10 pounds sounds so nasty
Thread Starter
Join Date: Sep 2006
Location: N.C.
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
2mm vs 3mm
the apex seal is what goes around the housing that holds the rotors correct... well is bumbing it up to 3mm like uber recomended for a car with about 280 to 300hp ?? can i get buy with 2mm seals ??
#2
Lives on the Forum
iTrader: (7)
There's lots of info on this already.
Basically, 3mm withstand detonation better, but don't seal as well. 2mm is perfectly fine if you have a good tune. If you are planning on huge power, with a very on-the-edge tune, 3mm might be a good idea, but far from neccesary. There are people making tons of power on 2mm seals. For the power you want, 3mm is nearly pointless.
Basically, 3mm withstand detonation better, but don't seal as well. 2mm is perfectly fine if you have a good tune. If you are planning on huge power, with a very on-the-edge tune, 3mm might be a good idea, but far from neccesary. There are people making tons of power on 2mm seals. For the power you want, 3mm is nearly pointless.
Thread
Thread Starter
Forum
Replies
Last Post