2 - Step Question
Thread Starter
Remission Motorsports
iTrader: (1)
Joined: Aug 2009
Posts: 249
Likes: 1
From: SLC, Utah
What kind of launch controls are avaliable for the FC rx7??
Break down of my car, is a S5, N/A, Rtek2.0 ECU, Manual. i know its kinda rough on the motor, but i like the way it sounds lol and it would be useful for those night i feel weird and go drag racing.
Anyone with ideas? would rather not spend upwards of 200 - 300+ bucks. even if its making one that'd be cool. Thanks guys.
Break down of my car, is a S5, N/A, Rtek2.0 ECU, Manual. i know its kinda rough on the motor, but i like the way it sounds lol and it would be useful for those night i feel weird and go drag racing.
Anyone with ideas? would rather not spend upwards of 200 - 300+ bucks. even if its making one that'd be cool. Thanks guys.
I find that my right foot is a very effective launch control for ProSolo (drag race launch) starts.
1) Rev to 5000-5500, depending on surface, and hold...
2) Yellow, yellow
3) Go.
1) Rev to 5000-5500, depending on surface, and hold...
2) Yellow, yellow
3) Go.
the dynatek arc-2 has a 2 step option for ignition cut and replaces the stock ignition with a more powerful one for further modifications down the road. cost = ~$300.
2 step is for pre-spooling the turbo to get a more effective launch, in the quarter/eighth the launch can mean alot and dicking with the pedal won't be as effective since these cars lack torque, if you don't have a turbo then there is no 2-step that will help you over just learning how to launch properly.
2 step is for pre-spooling the turbo to get a more effective launch, in the quarter/eighth the launch can mean alot and dicking with the pedal won't be as effective since these cars lack torque, if you don't have a turbo then there is no 2-step that will help you over just learning how to launch properly.
Thread Starter
Remission Motorsports
iTrader: (1)
Joined: Aug 2009
Posts: 249
Likes: 1
From: SLC, Utah
the dynatek arc-2 has a 2 step option for ignition cut and replaces the stock ignition with a more powerful one for further modifications down the road. cost = ~$300.
2 step is for pre-spooling the turbo to get a more effective launch, in the quarter/eighth the launch can mean alot and dicking with the pedal won't be as effective since these cars lack torque, if you don't have a turbo then there is no 2-step that will help you over just learning how to launch properly.
2 step is for pre-spooling the turbo to get a more effective launch, in the quarter/eighth the launch can mean alot and dicking with the pedal won't be as effective since these cars lack torque, if you don't have a turbo then there is no 2-step that will help you over just learning how to launch properly.
i'll look into the Dynatek as well. thank you
Thread
Thread Starter
Forum
Replies
Last Post
Adaptronic S5 Turbo PNP Unit questions
_Tones_
Adaptronic Engine Mgmt - AUS
10
May 25, 2021 05:37 AM
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
Nosferatu
2nd Generation Specific (1986-1992)
7
Sep 5, 2015 02:13 PM




