1991 RX7 convertible Wing problem Help!!!!!
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Location: New Jersey
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
1991 RX7 convertible Wing problem Help!!!!!
I have a 1991 RX7 convertible. I bought a new wing from exteme dimensions for it.
It came in one piece and goes across the trunk. I have to cut it How do I fill in the gap between the cuts or does anyone know of a wing for this car that comes in 3 pieces.
It came in one piece and goes across the trunk. I have to cut it How do I fill in the gap between the cuts or does anyone know of a wing for this car that comes in 3 pieces.
#7
Go Team Womble *)
Join Date: Nov 2006
Location: Australia
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
big port + big turbo=
Join Date: Apr 2005
Location: 10 mins from Texas World Speedway
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
what are your supporting mods and internal mods that you found it necessary to twin turbo your car? Also do you think that top mount is eficient enough to cool both of those turbos?
Interesting setup im curious to know how it works for you!
I like the look of the wing but dont know about verts, you are probally going to have to find a vert specific wing.
Interesting setup im curious to know how it works for you!
I like the look of the wing but dont know about verts, you are probally going to have to find a vert specific wing.
#9
Go Team Womble *)
Join Date: Nov 2006
Location: Australia
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
breckboarder55 : Here's a rough list, I don't want to fill up this thread about my car though. I'm currently switching to front mount at present and will have the car back on the road in about a week. With top mount and granny spec driving, because I don't have a hand controller or datalogit to tune the ecu boost was starting at around 2000rpm. I'll be posting a big writeup once it's done.
Here's a rough list of what's on mine (well will be in the case of the FC2000 bumper).
Re Amemiya Fc2000 Bumper
Re Amemiya Strutt Brace
Re Amemiya Responce Filter
Re Amemiya Leads
After market fly/clutch combo
Trust IC ~112mm
Twin TD05 18G turbo's
Twin GTR External Wastegates
3" dumps merging to 4" exhaust
Bosch Fuel pump
Highflowed Primaries
1000cc 2ndaries
FD Power FC
Rebuilt motor (lightened rotors no porting)
LSD
Water Injection
16" Davies thermo
Greddy Type R BOV
Greddy Throttle Elbow
Relocated battery
Buddy Club Spec R coilovers
Plenty more that I can't think off right now
As for the wing, your right. That's why I specifically asked him if it was a vert wing.
Here's a rough list of what's on mine (well will be in the case of the FC2000 bumper).
Re Amemiya Fc2000 Bumper
Re Amemiya Strutt Brace
Re Amemiya Responce Filter
Re Amemiya Leads
After market fly/clutch combo
Trust IC ~112mm
Twin TD05 18G turbo's
Twin GTR External Wastegates
3" dumps merging to 4" exhaust
Bosch Fuel pump
Highflowed Primaries
1000cc 2ndaries
FD Power FC
Rebuilt motor (lightened rotors no porting)
LSD
Water Injection
16" Davies thermo
Greddy Type R BOV
Greddy Throttle Elbow
Relocated battery
Buddy Club Spec R coilovers
Plenty more that I can't think off right now
As for the wing, your right. That's why I specifically asked him if it was a vert wing.
#10
FCs** the new Pokemon
iTrader: (3)
Join Date: Nov 2006
Location: Lexington, KY
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by REBOCK140
I have a 1991 RX7 convertible. I bought a new wing from exteme dimensions for it.
It came in one piece and goes across the trunk. I have to cut it How do I fill in the gap between the cuts or does anyone know of a wing for this car that comes in 3 pieces.
It came in one piece and goes across the trunk. I have to cut it How do I fill in the gap between the cuts or does anyone know of a wing for this car that comes in 3 pieces.
I've never seen or heard of ones like Worm Burner posted the pics of before...
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM