1991 RX7 convertible Wing problem Help!!!!!
I have a 1991 RX7 convertible. I bought a new wing from exteme dimensions for it.
It came in one piece and goes across the trunk. I have to cut it How do I fill in the gap between the cuts or does anyone know of a wing for this car that comes in 3 pieces. |
Is it a proper "vert" wing?
A proper ver wing has tabs underneath on the inside edges that enable you to fix it to the actually boot/trunk lid. |
But it has sides on it that attach to the antenna also.
|
? Not sure what you mean..
Pic's taken off mine. Show how it's mounted. http://members.westnet.com.au/helpme.../rx7/wing1.jpg http://members.westnet.com.au/helpme.../rx7/wing2.jpg |
u ricer...
|
^ :lol:
|
|
what are your supporting mods and internal mods that you found it necessary to twin turbo your car? Also do you think that top mount is eficient enough to cool both of those turbos?
Interesting setup im curious to know how it works for you! I like the look of the wing but dont know about verts, you are probally going to have to find a vert specific wing. |
breckboarder55 : Here's a rough list, I don't want to fill up this thread about my car though. I'm currently switching to front mount at present and will have the car back on the road in about a week. With top mount and granny spec driving, because I don't have a hand controller or datalogit to tune the ecu boost was starting at around 2000rpm. I'll be posting a big writeup once it's done.
Here's a rough list of what's on mine (well will be in the case of the FC2000 bumper). Re Amemiya Fc2000 Bumper Re Amemiya Strutt Brace Re Amemiya Responce Filter Re Amemiya Leads After market fly/clutch combo Trust IC ~112mm Twin TD05 18G turbo's Twin GTR External Wastegates 3" dumps merging to 4" exhaust Bosch Fuel pump Highflowed Primaries 1000cc 2ndaries FD Power FC Rebuilt motor (lightened rotors no porting) LSD Water Injection 16" Davies thermo Greddy Type R BOV Greddy Throttle Elbow Relocated battery Buddy Club Spec R coilovers Plenty more that I can't think off right now :rlaugh: As for the wing, your right. That's why I specifically asked him if it was a vert wing. |
Originally Posted by REBOCK140
I have a 1991 RX7 convertible. I bought a new wing from exteme dimensions for it.
It came in one piece and goes across the trunk. I have to cut it How do I fill in the gap between the cuts or does anyone know of a wing for this car that comes in 3 pieces. I've never seen or heard of ones like Worm Burner posted the pics of before... |
All times are GMT -5. The time now is 11:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands