1989 rex slowing down...
#1
Senior Member
Thread Starter
Join Date: Sep 2001
Location: Marietta, Georgia
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
1989 rex slowing down...
OK couple of questions -- my 89 (NA) pulls to about 7500 then kinda slows and backs off... I changed the air filter, plugs, no new wires had to order them -- everything else is fine... so whats the deal?!?!
and -- If i were to replace my cats with tubing whose system would you recommend -- i saw one on rx7.com (but it wasnt straight piping) and one on racing beat...
thanks
and -- If i were to replace my cats with tubing whose system would you recommend -- i saw one on rx7.com (but it wasnt straight piping) and one on racing beat...
thanks
#2
if you look at a dyno sheet for a 2nd gen pull you will see that most of the power of the motor drops off like 500-300 before redline. it basically peaks then drops off.
perhaps this is what your getting.
scott
perhaps this is what your getting.
scott
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Red-Dragon_Akuma
New Member RX-7 Technical
11
09-28-15 06:09 AM