2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

1987 TurboII lagging @ 4000 RPM

Old Jun 23, 2008 | 08:37 PM
  #1  
houston93rx7's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2007
Posts: 30
Likes: 0
From: houston
1987 TurboII lagging @ 4000 RPM

Car runs extremely well untill it hits 4000 RPm then it lags and bogs down. Up shift to next gear and no problem until u hit 4K rpm again. I have changed the turbo boost sensor, resistor pak under air filter box. Is my next move to change the secondary injectors or could it be the ecu. any help appreciated.
Reply
Old Jun 23, 2008 | 08:41 PM
  #2  
ITSWILL's Avatar
Wiring Nightmare
Tenured Member 15 Years
iTrader: (12)
 
Joined: Dec 2007
Posts: 1,714
Likes: 2
From: Ortonville, MI
search for 3800 rpm
Reply
Old Jun 24, 2008 | 09:31 AM
  #3  
InsomniacFC's Avatar
Will drive for parts
Tenured Member 15 Years
iTrader: (4)
 
Joined: Jun 2005
Posts: 1,252
Likes: 0
From: Modesto, CA
From the FAQ's

"I have this hesitation whenever I accelerate right around 3500-4000 RPM
The dreaded 3800 RPM hesitation is cause 90% of the time by poor ground connections between the engine, the battery, and the car. Clean or replace all the under hood ground connections. On 86 model year cars , replacing/regrounding the pressure sensor's ground wire has helped (do not re-ground a 87 or later model year). If there is still a problem after that, look at cleaning the fuel injectors and (on a N/A) that your 5th/6th ports are operating correctly."

It could also possibly be clogged cats if you still have them.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
barkz
Power FC Forum
37
Nov 21, 2020 09:34 AM
localized
New Member RX-7 Technical
3
Sep 16, 2015 12:18 AM
High_Carb_Diet
Power FC Forum
1
Sep 5, 2015 09:07 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:40 AM.