13b into a 12a 1st gen - no fuel????
#1
Postmaster General
Thread Starter
Join Date: Jan 2004
Location: Lebanon, OR
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
13b into a 12a 1st gen - no fuel????
i put an 87 13b into my 83 GSL.. everything is hooked up, computer works, and i have spark... but im not getting any fuel! is there any way i can test the fuel injectors, or maybe force them to work? im using a fuel pump that does 78psi. is there something special i might need to make the fuel injectors work that i might be missing?
thanks
mike
thanks
mike
#3
Ga-nome liberator
Join Date: Jul 2002
Location: Hell
Posts: 1,990
Likes: 0
Received 0 Likes
on
0 Posts
Check to make sure all fuel lines are connected. Then pull the rail off with the injectors still entact and depress the pin on the injectors, if fuel comes out then have some one try and start the car. If no fuel comes out check the lines and everything and make sure you don't have any restrictions. You can also check the fuel pump to see if it is working by hooking up an multimeter up to it.
- Steiner
- Steiner
Thread
Thread Starter
Forum
Replies
Last Post
craaaazzy
Comments and Suggestions Archive
3
08-21-15 02:00 PM
KAL797
Test Area 51
0
08-11-15 03:47 PM