Ok going to carb my 6 port but what do I do with the primary injector holes in the center iron?

Ok just to MAE sure I getting everthing right I getting

Rb carb 6 port kit
85 12a dist
2 msd blaster 2 coils
7 psi electric fuel pump

That's about it right?

 

List looks right. As for as plugging the primary holes I've seen plugs for sale just dont remember what site it wason but some guys will use old bolts that fit snuggly in the holes and some RTV -I've used the black gasket maker stuff w/ no problems. I'd save yourself some serious cash and get yourself the "newer Holley's" as they are very simple to tune and superior in quality to the dinasours RB sells.

 

Also if your not using the aux.port sleeves consider smoothing out the 5th and 6th ports w/ devcon for smoother flow. If you decide to keep the sleeves Pineapple inserts help w/ flow as well.

 

eah right now I looking for simplicity since I need a another car and sin e I sold most everthing to finish redoing my turbo setup just gong t go carb

Which is the new holley carb?
I have never used the sleeves any how and don't trust he pineapple sleeves

 

Can't put sleeves in with the rb intake anyway. He is referring to the Holley Avenger, personally I'd go with and Edelbrock thunder series 550. As for the injectors, you should be able to buy plugs like I have, check with Dan Atkins.

 

I used the aux.sleeves w/ the Jaytech intake w/ no problems at all. Yes I was refering to the Holley Avenger but there are other Holley's also that are years ahead as far as tunabilty than RB's "modified" Holleys at about 1/2 the price.

 

I probably just going to go with RB kit seams to be the simplest and I found some injector plugs.

 

Yeah looks like the RB kit and the Mallory pump

But how do i wire up the dizzy i guess its pretty simple.

 

got most of everthing thanks for everones help with post pics when done

 

can you post what you found?