2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

12 second pass setups

Thread Tools
 
Search this Thread
 
Old Jul 18, 2009 | 10:55 AM
  #1  
rx7 SE's Avatar
Thread Starter
Enthusiast
Tenured Member 15 Years
iTrader: (5)
 
Joined: Aug 2004
Posts: 2,181
Likes: 1
From: Charlotte, NC
12 second pass setups

How many people have run a 12 second pass and what setup were you using... turbo, tires, accomodating mods etc....

I'm about to upgrade to a BNR stage 1 hybrid and I would like to hit high 12's on 12psi @ our dragway in Charlotte, but just seeing what other people have done out there to see how realistic that is. The fastest car I've beaten ran a 13.8 @ 106mph and I walked him pretty easy with the stock 2 1/4 " inch exhaust and on roughly 6psi, so I know 13's is realistic... what do you guys think about 12's in our fc?


Thanks,

~Ant
Reply
Old Jul 18, 2009 | 11:02 AM
  #2  
drifter403's Avatar
Senior Member
iTrader: (2)
 
Joined: Sep 2008
Posts: 475
Likes: 0
From: santa fe springs
first up to a 3" single passenger exit exhaust for weight reduction and to help build the more power second cut out all other extra weight... not sure whatelse you have on your car but my cousin used to run 11.8s on his old T2 before he fliped it lol
Reply
Old Jul 18, 2009 | 01:44 PM
  #3  
fc3s91's Avatar
R.I.P Mark( Icemark )
Tenured Member: 20 Years
iTrader: (23)
 
Joined: Nov 2001
Posts: 3,912
Likes: 1
From: socal
easy pass, Check my sig video.
Reply
Old Jul 18, 2009 | 03:17 PM
  #4  
*TOUCH*'s Avatar
Project P --- Pedospeed
Tenured Member 10 Years
iTrader: (29)
 
Joined: Apr 2007
Posts: 1,235
Likes: 0
From: Norfolk, VA
mid 12s are no sweat for a modestly modded fc.
Reply
Old Jul 18, 2009 | 03:32 PM
  #5  
TERVO's Avatar
Full Member
 
Joined: Jul 2009
Posts: 50
Likes: 0
From: TEXAS
TX

YOU SURE CAN GO FASTER THEN A 12! AND IT SURE SHOWS WITH THE TYPE OF SET UP YOU USE! CHECK WHAT I HAVE UNDER MY HOOD! BEST TIME ON MY 12A IN A 1/8 MILES WAS 8.1557 BOOSTING 13PSI ON Z RATED TIRE!.... ENJOY THE VIDEO!.....<object width="560" height="340"><param name="movie" value="http://www.youtube.com/v/O1ZStKvjVTk&hl=en&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/O1ZStKvjVTk&hl=en&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="560" height="340"></embed></object>HERES A SHOT OF THE FASTEST ROTARY ENGINE! ENJOY...
Originally Posted by rx7 SE
How many people have run a 12 second pass and what setup were you using... turbo, tires, accomodating mods etc....

I'm about to upgrade to a BNR stage 1 hybrid and I would like to hit high 12's on 12psi @ our dragway in Charlotte, but just seeing what other people have done out there to see how realistic that is. The fastest car I've beaten ran a 13.8 @ 106mph and I walked him pretty easy with the stock 2 1/4 " inch exhaust and on roughly 6psi, so I know 13's is realistic... what do you guys think about 12's in our fc?


Thanks,

~Ant

Last edited by TERVO; Jul 18, 2009 at 03:35 PM.
Reply
Old Jul 18, 2009 | 07:03 PM
  #6  
sen2two's Avatar
Rx2 > FD
Tenured Member: 20 Years
iTrader: (10)
 
Joined: Apr 2005
Posts: 3,361
Likes: 8
From: Florida, Orlando
12 seconds has been done with the stock turbo...

from looking at what you have listed in your sig plus the addition of a BNR turbo. go to 14psi and make sure the tune is real nice. add some drag radials and that should get you a 12.9 or better...

ive seen it done a stock S4 TII with just a front mount and standalone ECU. 12.3 with drag radials...
Reply
Old Jul 18, 2009 | 07:36 PM
  #7  
*TOUCH*'s Avatar
Project P --- Pedospeed
Tenured Member 10 Years
iTrader: (29)
 
Joined: Apr 2007
Posts: 1,235
Likes: 0
From: Norfolk, VA
like i said, mid 12s can be had by modestly modded fcs (TIIs of course) no prob.
Reply
Old Jul 18, 2009 | 07:42 PM
  #8  
viperkiller7's Avatar
1.3 liters of whoop ass
Tenured Member 20 Years
iTrader: (11)
 
Joined: Mar 2002
Posts: 1,174
Likes: 0
From: Reading pa
12.2 @114 exhaust, intake , ported motor factory upgrade turbo,fmic super afc,and drag radials pulled 1.8 60'....never ran the cosmo t78 setup...................................regrets
Reply
Old Jul 19, 2009 | 07:09 AM
  #9  
rx7 SE's Avatar
Thread Starter
Enthusiast
Tenured Member 15 Years
iTrader: (5)
 
Joined: Aug 2004
Posts: 2,181
Likes: 1
From: Charlotte, NC
so it can be done, I definitely believe that, but I haven't heard many setups of people who have done it. Can it be done with stock ports as well?

btw, fc3s91... nice pass man!
Reply
Old Jul 19, 2009 | 09:54 AM
  #10  
*TOUCH*'s Avatar
Project P --- Pedospeed
Tenured Member 10 Years
iTrader: (29)
 
Joined: Apr 2007
Posts: 1,235
Likes: 0
From: Norfolk, VA
stock ports? YES. stock car? NO. unless your the micheal schumacher or drag racing..
Reply
Old Jul 19, 2009 | 11:29 AM
  #11  
sharingan 19's Avatar
Rotary Revolutionary
Tenured Member 15 Years
iTrader: (16)
 
Joined: May 2006
Posts: 3,881
Likes: 3
From: Jacksonville, Tampa & Tallahassee
and even then....
lol
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
Jul 17, 2019 02:20 PM
23Racer
Canadian Forum
10
Sep 18, 2015 11:10 AM
JP's 93 fd
3rd Generation Specific (1993-2002)
5
Sep 16, 2015 01:12 PM




All times are GMT -5. The time now is 02:40 AM.