[VID] Wanna know what just a downpipe sounds like on a TII?
Thread Starter
I broke it!
Joined: Feb 2001
Posts: 468
Likes: 0
From: Near Memphis
[VID] Wanna know what just a downpipe sounds like on a TII?
http://www.cdnwfl.com/~brian/videos/openexhaust.wmv (4MB)
I dropped the engine in this morning and had to swap exhausts with the 'vert (had my N1 on it). I had just pulled the 'vert out of the garage and it was time to roll the Turbo back inside to hang the exhaust on it.
This engine is for some reason, very loud with the N1 compared to the last engine. I took it for a shakedown cruise right after this was filmed and a friend said he saw me dumping 4ft flames out the exhaust on about a 10 second burn.
More rad videos coming soon: conecam+pointed towards exhaust+nighttime = good times!
I dropped the engine in this morning and had to swap exhausts with the 'vert (had my N1 on it). I had just pulled the 'vert out of the garage and it was time to roll the Turbo back inside to hang the exhaust on it.
This engine is for some reason, very loud with the N1 compared to the last engine. I took it for a shakedown cruise right after this was filmed and a friend said he saw me dumping 4ft flames out the exhaust on about a 10 second burn.
More rad videos coming soon: conecam+pointed towards exhaust+nighttime = good times!
Last edited by Sledgehammer; Oct 27, 2002 at 09:59 PM.
Damaged Little F*cker
Joined: Mar 2001
Posts: 840
Likes: 0
From: High Point, North Carolina
heh, i had to drive my old 87 once with just a D/P on it. i had to bring a friend of mine his wallet and i was in the middle of working on the car. my friend said he heard me for like 5 mins before i was even in sight. and i wasnt even goin fast, didnt rev past 3500 rpm. rotaries are loud!!
Trending Topics
Fok mi
Joined: Sep 2002
Posts: 892
Likes: 0
From: Sioux Falls, SD
I'm running a halfass open exhaust on my TII. the DP isn't really connecting to the exhaust in a good manner.. like I can kinda see between the two 
I'm going to get new bolts/washers/nuts tomarrow and try to fix that.. 
I'm going to get new bolts/washers/nuts tomarrow and try to fix that..
Full Member
Joined: Oct 2002
Posts: 142
Likes: 0
From: spring hill, tennessee
hey brian, it's ted, chriss's brother, got my TII, 87 with 133,000 miles, but it runs, im on a damn school computer(no sound) so lets see some flames!!, i gotta prove to this mr2 junkie that rx7's are god's gift...
Thread Starter
I broke it!
Joined: Feb 2001
Posts: 468
Likes: 0
From: Near Memphis
Probably this evening, Jimmy and I are going to make some conecam runs and get some flames on tape. I just need to figure out where to clip the microphone so it doesn't becoome a crispy critter
BTW, the tall dude in the RX-7.com t-shirt is me . The video doesn't even begin to do the sound justice - it's chest-shaking loud!
It's amazing how much muffling an N1 actually does, BTW - the car was quieted down BIG time. It's still damn loud, but sounds killer!
Dale
. The video doesn't even begin to do the sound justice - it's chest-shaking loud!It's amazing how much muffling an N1 actually does, BTW - the car was quieted down BIG time. It's still damn loud, but sounds killer!
Dale
Thread
Thread Starter
Forum
Replies
Last Post
datfast1
West RX-7 Forum
3
Sep 14, 2015 06:58 PM
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM
The1Sun
1st Generation Specific (1979-1985)
0
Sep 7, 2015 10:21 PM
83revival
New Member RX-7 Technical
4
Sep 3, 2015 10:42 PM
