widebody from scratch
#131
well rested,buffet o food
Thread Starter
Thanks for the compliments aerosmith and touturborx7.
Occ may 2nd....yup will definately be there, lonecorp. That was good times last year.
Yeah franco, i will be there. That is one of my regrets from last year. Shoulda went.
Still busy with school, so no updates yet on my se-t.
john ny
Occ may 2nd....yup will definately be there, lonecorp. That was good times last year.
Yeah franco, i will be there. That is one of my regrets from last year. Shoulda went.
Still busy with school, so no updates yet on my se-t.
john ny
#133
well rested,buffet o food
Thread Starter
Yup. Cut them alot, recrease them to form new seam, reweld them then por15 the jesusballs out of them.
Not as bad as it sounds. I had to walk up to the car and put a foot or so long cut with the sawzall to commit myself. The rest kinda falls in place.
You will be fine.
thanks for the compliment.
start a thread and post pictures in it. Or pm me them.
john ny
Not as bad as it sounds. I had to walk up to the car and put a foot or so long cut with the sawzall to commit myself. The rest kinda falls in place.
You will be fine.
thanks for the compliment.
start a thread and post pictures in it. Or pm me them.
john ny
#136
well rested,buffet o food
Thread Starter
Thanks.
I am starting to see what you guys mean about the fd "light height".
They just looked cross eyed when i was in my mocking phase. Also, the lights looked like they would shine at a 70 degree angle, ultimately blinding helicoptors.
my unemploydedness prompted me to cut the widebody, weld bolts to the wing and drill holes in the decklid area. Wing is on.
I will post pictures tomorrow.
Ghettobooth materials almost fully aquired.
Gonna paint this bitch soon.
john ny
I am starting to see what you guys mean about the fd "light height".
They just looked cross eyed when i was in my mocking phase. Also, the lights looked like they would shine at a 70 degree angle, ultimately blinding helicoptors.
my unemploydedness prompted me to cut the widebody, weld bolts to the wing and drill holes in the decklid area. Wing is on.
I will post pictures tomorrow.
Ghettobooth materials almost fully aquired.
Gonna paint this bitch soon.
john ny
#137
well rested,buffet o food
Thread Starter
U P D A T E S........ sort of. wing is fit, still need suspension though (last picture proves it).
Tell me what you think. Dont pull any punches....but just explain why.
I sanded the paint off of the edge where the wing and widebody meet, so the transition looks a little more harsh than it actually is. It should look a lot better when its all the same color.....hopefully.
Any body have any tokico hp?
John ny
Tell me what you think. Dont pull any punches....but just explain why.
I sanded the paint off of the edge where the wing and widebody meet, so the transition looks a little more harsh than it actually is. It should look a lot better when its all the same color.....hopefully.
Any body have any tokico hp?
John ny
#141
well rested,buffet o food
Thread Starter
Does anyone know where i can find a reasonably priced pair of work emitz for the rear? (when i start working at the new job i have know idea what it is yet)
Plate is for the miata at shows. Beats photoshopping plate out after taking pictures. I just kinda balance it on there.
john ny
#142
Slowpoke
iTrader: (3)
geez man its gonna look gangster lowrider with the emitz!
(for those who dont know, these are emitz http://www.wheelsdatabase.com/upload...s/emitz_84.jpg
should be cool tho, they seem like super rare wheels though.. seems like they would be great to depict what a japanese lowrider might look like. hahah
(for those who dont know, these are emitz http://www.wheelsdatabase.com/upload...s/emitz_84.jpg
should be cool tho, they seem like super rare wheels though.. seems like they would be great to depict what a japanese lowrider might look like. hahah
#143
Junior Member
Join Date: Nov 2006
Location: Medford Or
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
When I was younger I had an integra, the first thing to get it lower was to get 50-series tires on 14" rims, then I got ebay coils and lowered the car another 3-4 inches, **** was baller low, rims were crappy tho lol.
BUT!!
Pulling out of a parking lot my transmission touched asphalt and the speedo sensor was found hanging against the header lol.
The moral??
You have a nice *** car man, your build has honestly helped me learn more about my car. You don't have to go hella low, just ride homie.
BUT!!
Pulling out of a parking lot my transmission touched asphalt and the speedo sensor was found hanging against the header lol.
The moral??
You have a nice *** car man, your build has honestly helped me learn more about my car. You don't have to go hella low, just ride homie.
#144
well rested,buffet o food
Thread Starter
mxmastr: thanks, man.... i appreciate the compliment. Not going super low though, i want to still be able to drive it (tokico hp's with rb springs (or something else that drops the car about an inch or so.
Now i definately NEED suspension. We just put this tokico hp setup in a buddy o mine's ae86 today.
Thing sits propers now.
LOL "80's..........80's garage"
john ny
Now i definately NEED suspension. We just put this tokico hp setup in a buddy o mine's ae86 today.
Thing sits propers now.
LOL "80's..........80's garage"
john ny
#148
well rested,buffet o food
Thread Starter
^^^^^^Huge fan of the elise. Good advice, i agree fully regarding the lines that the huge red arrows point too . My issue is that i set the car up for daily driving. I think the only thing worse than the existing lines is a price chopper cart or ******* leaning against my car stress cracking it while i am inside, after putting tons of time into molding the wing. Then if i mold the wing the widebody kit will have to be molded and the body kit. The car will then become undrivable and i will have 2 undrivable vehicles. The miata is my trophy winning show car. This is a driver. I cant lose sight of that.
I do see what you are saying though and agree with the necessity to clean it up. I plan on taking your advice when i am prepping for paint to get an even contour. Once i have 3m holding everything tight on the body, and have 1 color back there (dealing with 4 whites) , i think things should be a lot neater.
I will call my buddy about the glass roof later.
Your best bet is start a build thread. So people can post and help you out. This thing has been pretty helpful for me.
john ny
I do see what you are saying though and agree with the necessity to clean it up. I plan on taking your advice when i am prepping for paint to get an even contour. Once i have 3m holding everything tight on the body, and have 1 color back there (dealing with 4 whites) , i think things should be a lot neater.
I will call my buddy about the glass roof later.
john ny
#150
well rested,buffet o food
Thread Starter
^^^^^Thanks a lot DKWASHEREXD. Suspension will definately come after paint.
I have had quite a few pms about the miata, and decided to post some pics with the rx7 i took today.
These are the last pictures of the "cracker ***" rx7.
I will post shots of prep and color next (unless i wreck it then those will be next).
My jobless *** has no excuse to not paint this bitch.
Enjoy......
The rx7 is a small car compared to my friends supras, mustangs and classics......but its funny how big the miata makes it look
john ny
I have had quite a few pms about the miata, and decided to post some pics with the rx7 i took today.
These are the last pictures of the "cracker ***" rx7.
I will post shots of prep and color next (unless i wreck it then those will be next).
My jobless *** has no excuse to not paint this bitch.
Enjoy......
The rx7 is a small car compared to my friends supras, mustangs and classics......but its funny how big the miata makes it look
john ny