by request, autox fc ***pics
#1
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
by request, autox fc ***pics
at the request of some guyz from the fc *** end shot thread...
these are what I have
this car IS NOT finished. I am doing as much as I can in between autox's.
Shot with SP510UZ at 2008-04-29
Shot with SP510UZ at 2008-05-02
Shot with SP510UZ at 2008-05-02
Shot with SP510UZ at 2008-05-02
Shot with SP510UZ at 2008-05-02
Shot with SP510UZ at 2008-05-02
these are what I have
this car IS NOT finished. I am doing as much as I can in between autox's.
Shot with SP510UZ at 2008-04-29
Shot with SP510UZ at 2008-05-02
Shot with SP510UZ at 2008-05-02
Shot with SP510UZ at 2008-05-02
Shot with SP510UZ at 2008-05-02
Shot with SP510UZ at 2008-05-02
#2
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
#3
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
#6
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
the rear fenders are from Raceonusa, I hate race on usa btw. they are OK but not somthing that goes on really easy.
took me 3 days to get them CLOSE.
the rear cooler is my oil cooler.
use to have a fmic + ac and the oilcooler, it was just to much for roadracing so...
oilcooler got moved to the back and the intercooler got mounted flat, everything works VERY well now, but the ac is gone now to sence it has become more race car so....
took me 3 days to get them CLOSE.
the rear cooler is my oil cooler.
use to have a fmic + ac and the oilcooler, it was just to much for roadracing so...
oilcooler got moved to the back and the intercooler got mounted flat, everything works VERY well now, but the ac is gone now to sence it has become more race car so....
Trending Topics
#18
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
ok no oil booster. i simply dont need it... I have thousands of miles on the setup and no problems.
the IC is just like a V mount only its upside down. originally It was an AC car and its so hot in houston that on the freeway with the fmic and the ac on the car would start to overheat... SO had to get rid of the FMIC. and because I had already spent alot of many on the pwr radiator, my only other option was to mount it flat underneath the front of the car... so I had to move the oil cooler... to the back of the car... That left me plenty of room to mount the IC flat and butted up against the radiator. SOOOOO i used some lexan to make a "batwing" under the front of the car now air gets forced through one or the other (it also has the added effect of making the front bodywork really rigid yet flexible). I have a lip that extends down in front of the intercooler that I run on the track to take advantage of the low pressure pocket to further ade in the cooling. there is NO loss of power from heat soak. I finally have a cooling system that suits the turbo rotary for road racing.
the IC is just like a V mount only its upside down. originally It was an AC car and its so hot in houston that on the freeway with the fmic and the ac on the car would start to overheat... SO had to get rid of the FMIC. and because I had already spent alot of many on the pwr radiator, my only other option was to mount it flat underneath the front of the car... so I had to move the oil cooler... to the back of the car... That left me plenty of room to mount the IC flat and butted up against the radiator. SOOOOO i used some lexan to make a "batwing" under the front of the car now air gets forced through one or the other (it also has the added effect of making the front bodywork really rigid yet flexible). I have a lip that extends down in front of the intercooler that I run on the track to take advantage of the low pressure pocket to further ade in the cooling. there is NO loss of power from heat soak. I finally have a cooling system that suits the turbo rotary for road racing.
#23
Senior Member
Thread Starter
Join Date: Nov 2004
Location: Houston
Posts: 318
Likes: 0
Received 0 Likes
on
0 Posts
oil temps never go above 215
oil psi at 1200rpm ~60psi cold a little under 40psi hot.
hits 110psi at ~6300rpm? mabye less? duno hard to look 2 places at once....
air for the oil cooler comes from the high pressure pocket. in front of the rear bumper. i have the dual 1600cfm cooling fans. and there is a big low pressure pocket created by the diffuser all help. ive done some camcorder +string tests to 120mph and works great!
oil psi at 1200rpm ~60psi cold a little under 40psi hot.
hits 110psi at ~6300rpm? mabye less? duno hard to look 2 places at once....
air for the oil cooler comes from the high pressure pocket. in front of the rear bumper. i have the dual 1600cfm cooling fans. and there is a big low pressure pocket created by the diffuser all help. ive done some camcorder +string tests to 120mph and works great!