Project GXL DRFT!!! (pics)
#51
Full Member
Thread Starter
Join Date: Jun 2007
Location: Sac Town
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Ok so i pulled the entire strut and brake assembly to get to the bottom of this and the sub frame mount is deff tweaked!!!
The damn thing is like butter, a couple of love taps will taco the B*tch!!!
Oh well ima get it as straight as i can then replace the control arm and "bonus" piece !
The damn thing is like butter, a couple of love taps will taco the B*tch!!!
Oh well ima get it as straight as i can then replace the control arm and "bonus" piece !
#54
Full Member
Thread Starter
Join Date: Jun 2007
Location: Sac Town
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
This is going to be my next mod!!!!
I know a fellow that has a machine shop, with sick welders,and pipe benders!!!
Any suggestions???
Im going to moch one up using cheap ebt pipe then bend the steel pipes separately and weld em up!!!
#67
Full Member
Thread Starter
Join Date: Jun 2007
Location: Sac Town
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Do you think this dent is going to be fatal to my 13b????
Or can i just replace it a little later????
<a href="http://s71.photobucket.com/albums/i158/87soup/?action=view¤t=crap002-1.jpg" target="_blank"><img src="http://i71.photobucket.com/albums/i158/87soup/crap002-1.jpg" border="0" alt="Photobucket"></a>
<a href="http://s71.photobucket.com/albums/i158/87soup/?action=view¤t=crap001-1.jpg" target="_blank"><img src="http://i71.photobucket.com/albums/i158/87soup/crap001-1.jpg" border="0" alt="Photobucket"></a>
Or can i just replace it a little later????
<a href="http://s71.photobucket.com/albums/i158/87soup/?action=view¤t=crap002-1.jpg" target="_blank"><img src="http://i71.photobucket.com/albums/i158/87soup/crap002-1.jpg" border="0" alt="Photobucket"></a>
<a href="http://s71.photobucket.com/albums/i158/87soup/?action=view¤t=crap001-1.jpg" target="_blank"><img src="http://i71.photobucket.com/albums/i158/87soup/crap001-1.jpg" border="0" alt="Photobucket"></a>
#70
Full Member
Thread Starter
Join Date: Jun 2007
Location: Sac Town
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
I made the lip outa home depot floor base material... like 4bucks for the black stuff, then go yo OSH to get the brace... its a 1" tall strip of thin metal with hecka holes in it then mount it with the stock lip holes, then 3M double side indoor outdoor tape... one strip along the front bumper and one more along the brace...
#75
Full Member
Thread Starter
Join Date: Jun 2007
Location: Sac Town
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Got to install the 6 puck today!!!!
old bearing
new one installed
old plate and disk
look at the difference!!!
Before i sanded the flywheel with 2000 grit sand paper...
old bearing
new one installed
old plate and disk
look at the difference!!!
Before i sanded the flywheel with 2000 grit sand paper...