2nd Generation Non-Technical and pictures Show off your car & view 2nd gen RX-7 pictures here.

Post pics of your proud parts!

Thread Tools
 
Search this Thread
 
Old May 16, 2008 | 08:31 AM
  #1  
RETed's Avatar
Thread Starter
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Post pics of your proud parts!

I was just wondering what everyone is hording out there...
I know a bunch of you are sitting on some rare and expensive stuff, so let's see it!
(Anyone own that HKS T51R SS turbo exhaust manifold that was on eBay???)
There's pics posted here and there, but I'd figure why not consolidate it so everyone can go Uuuuuuuuu and Aaaaaaaahhh in a single thread!


-Ted
Reply
Old May 16, 2008 | 09:51 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
Everyone has probably seen this before:





Not particularily expensive, but rather rare and unique.

This isn't really a "part" per say, but it's rotary and very rare. My 1976 RX-5 Cosmo. 13B 4 port, Nikki, etc.





Reply
Old May 16, 2008 | 10:50 AM
  #3  
87 t-66's Avatar
not a drifter
Tenured Member: 20 Years
iTrader: (133)
 
Joined: Jun 2004
Posts: 9,337
Likes: 6
From: Columbus, Ohio
ill add a couple...cusco door bars, genuine mazdaspeed oil cap, and inifni strut tower bar



Last edited by 87 t-66; May 16, 2008 at 11:00 AM.
Reply
Old May 16, 2008 | 11:21 AM
  #4  
KrisD1's Avatar
Full Member
Tenured Member 10 Years
 
Joined: Nov 2007
Posts: 187
Likes: 0
From: belgium
What about these


Reply
Old May 16, 2008 | 02:01 PM
  #5  
RETed's Avatar
Thread Starter
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
J-spec digital AC logicon...

(I gotta go dig up everything else and take pics. :P )


-Ted
Attached Thumbnails Post pics of your proud parts!-diglogicon01.jpg  
Reply
Old May 16, 2008 | 02:16 PM
  #6  
t24todd's Avatar
RE_p Rotors
Tenured Member 15 Years
iTrader: (7)
 
Joined: Dec 2006
Posts: 950
Likes: 0
From: Newport News/Fredericksburg
nice love 2 replace my logicon with the digital..i dont have anything rare besides my front s5 lip from drezeldee think thats his name..only a couple of us have it and contors the s5 bumper perfectly..
Reply
Old May 16, 2008 | 02:22 PM
  #7  
Stanello's Avatar
backslash beanbagrace
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Oct 2004
Posts: 2,141
Likes: 2
From: San Francisco, CA
Originally Posted by Aaron Cake
4 rotor eshaft


Keyed in the middle right? That will be an interesting engine to assemble.
Reply
Old May 16, 2008 | 02:23 PM
  #8  
finishline's Avatar
Not Even Foo
Tenured Member 15 Years
iTrader: (13)
 
Joined: Oct 2006
Posts: 8,999
Likes: 1
From: South Bay, CA
moar!
Reply
Old May 16, 2008 | 02:24 PM
  #9  
CyborgRyu's Avatar
Drift FC
Tenured Member 10 Years
iTrader: (8)
 
Joined: Nov 2003
Posts: 1,602
Likes: 1
From: Cincinnati, OH
I don't have anything rare. Except Battle Version Toe Rods.
Reply
Old May 16, 2008 | 03:14 PM
  #10  
CWestFD3S's Avatar
Senior Member
Tenured Member 20 Years
iTrader: (49)
 
Joined: Jul 2002
Posts: 630
Likes: 0
From: Los Angeles
Here's my stuff:
Had these in the car


Then I replace the Mazdaspeeds with these RE Amemiya seats



I have collected these over the years as well


I have more stuff but in the process I managed to drop and break the camera...soo yea... Enjoy
Reply
Old May 16, 2008 | 03:41 PM
  #11  
87 t-66's Avatar
not a drifter
Tenured Member: 20 Years
iTrader: (133)
 
Joined: Jun 2004
Posts: 9,337
Likes: 6
From: Columbus, Ohio
Originally Posted by RETed
J-spec digital AC logicon...

(I gotta go dig up everything else and take pics. :P )


-Ted
does it actually work though?
Reply
Old May 16, 2008 | 03:53 PM
  #12  
RETed's Avatar
Thread Starter
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Originally Posted by CWestFD3S
I have collected these over the years as well
And now my ulterior motive to have started this thread...

Willing to sell the blue one???
I've got a green one myself and two green horn buttons, but I've found the blue version is harder to find of all three colors.
Seen a lot of red ones, but red is not my color...


-Ted
Reply
Old May 16, 2008 | 03:57 PM
  #13  
RETed's Avatar
Thread Starter
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Originally Posted by 87 t-66
does it actually work though?
No...not yet.
If you're asking if it's plug-n-play...not even close.
I'm going to track down the wiring diagram and see how much of it can be spliced in.
Luckily, my unit came with cut plugs, so I know the wire colors.
Some of the wire colors are identical, but I cannot confirm I can just splice them in.
I would imagine there's a different sub-harness, as I wouldn't think Mazda would design a totally new dash harness just to use this thing.

There's a nice write-up somewhere in here that goes into a little detail about how it all works.
There's a temp sensor that unique to this system.

This is not a priority to figure out anytime soon, but I'll work on it eventually.


-Ted
Reply
Old May 16, 2008 | 03:59 PM
  #14  
younG_Gunner's Avatar
Re-Mama Mia!
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jun 2004
Posts: 1,084
Likes: 0
From: NorCal
Never mind!
Reply
Old May 16, 2008 | 04:01 PM
  #15  
trueimport's Avatar
Beast Mode
Tenured Member 20 Years
iTrader: (8)
 
Joined: Mar 2002
Posts: 820
Likes: 0
From: USA!
Originally Posted by CWestFD3S
Do you by any chance still have these?
Reply
Old May 16, 2008 | 04:09 PM
  #16  
CWestFD3S's Avatar
Senior Member
Tenured Member 20 Years
iTrader: (49)
 
Joined: Jul 2002
Posts: 630
Likes: 0
From: Los Angeles
RETed: Sorry man, the blue is my favorite. It took me almost 4 years to track that down. I feel you on the red...its definitely not my favorite color but since I have all 3 its kinda like the complete set. I have another red one that I use to daily on my car but I'm looking to get another black one.

trueimport: I do still have them however since the RE seats are pretty much the same seat but recovered I used the mounting brackets. I have another set of Mazdaspeed mounting brackets for the FC but I think they are for the Type F seats and not the Sports Seats.
Reply
Old May 16, 2008 | 04:14 PM
  #17  
MaczPayne's Avatar
Mac Attack
Tenured Member 15 Years
iTrader: (5)
 
Joined: Dec 2005
Posts: 5,668
Likes: 22
From: California
Got this old school RE-A shift **** from 87GTR last year:

Crappy pic, haha!



I liked my weighted ball **** better, but this **** is just too cool to replace!
Reply
Old May 16, 2008 | 04:23 PM
  #18  
trueimport's Avatar
Beast Mode
Tenured Member 20 Years
iTrader: (8)
 
Joined: Mar 2002
Posts: 820
Likes: 0
From: USA!
Originally Posted by CWestFD3S
RETed: trueimport: I do still have them however since the RE seats are pretty much the same seat but recovered I used the mounting brackets. I have another set of Mazdaspeed mounting brackets for the FC but I think they are for the Type F seats and not the Sports Seats.
Would you want to relinquish them ? Do you think they would fit on the Corbeau bracket? Do they have sliders?
Reply
Old May 16, 2008 | 04:33 PM
  #19  
CWestFD3S's Avatar
Senior Member
Tenured Member 20 Years
iTrader: (49)
 
Joined: Jul 2002
Posts: 630
Likes: 0
From: Los Angeles
trueimport: pm me and maybe you can convince me to part with them
Reply
Old May 16, 2008 | 04:49 PM
  #20  
stylEmon's Avatar
FC since 99
Tenured Member 15 Years
iTrader: (2)
 
Joined: Feb 2006
Posts: 2,712
Likes: 2
From: PHL
8" wide BBS gold meshies



I got this cool Devil's Own tank. The pump mounts on the tank, and the tank fits perfectly in the rear bin!!


I've always liked the fact that I switched out my S4 grey interior for a S5 black. I still need some better seats and need to spray the demister vents.
Before


After
Reply
Old May 16, 2008 | 05:45 PM
  #21  
13btII's Avatar
Senior Member
Tenured Member 15 Years
 
Joined: Dec 2004
Posts: 366
Likes: 0
From: nj


Installing soon!!!
Reply
Old May 16, 2008 | 06:40 PM
  #22  
RETed's Avatar
Thread Starter
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 22
From: n
Metalit high flow, metal substrate cat from Japan...
Drop in replacement for stock main cat


-Ted
Attached Thumbnails Post pics of your proud parts!-metalit01.jpg  
Reply
Old May 16, 2008 | 07:21 PM
  #23  
SMT's Avatar
SMT
Full Member
 
Joined: Sep 2007
Posts: 115
Likes: 0
From: Australia
infini iv strut brace-


infini seats-


carbon-fibre sunroof-


17x8 inch forged alloy SPARCO VIPERS-


Dont know if these are rare for u guys in the states but these RX-7 foot pedals are rare here in Australia-


Last edited by SMT; May 16, 2008 at 07:27 PM.
Reply
Old May 16, 2008 | 07:28 PM
  #24  
CWestFD3S's Avatar
Senior Member
Tenured Member 20 Years
iTrader: (49)
 
Joined: Jul 2002
Posts: 630
Likes: 0
From: Los Angeles
Found some pics I took awhile back of some stuff:

Auto EXE/ Gruppe M intake
HKS top mount
RE Amemiya Strut tower bar & 9mm race plugs


RE Amemiya Canards, Turn signals, Mirrors, wing, and rims


RE Amemiya Oil filler cap


Front bumper, Side skirts and diffuser are Shine Auto
Reply
Old May 16, 2008 | 09:04 PM
  #25  
red_s5_fc3s's Avatar
Red and Gold
Tenured Member: 15 Years
 
Joined: Sep 2006
Posts: 1,257
Likes: 0
From: Irvine, CA
Cwest, we should build an fc chuck full of rare parts! I'm down if you are!
Reply



All times are GMT -5. The time now is 11:41 PM.