Pictures of FC wheel fitment with specs... ***Picts-n-Specs ONLY***
#701
Senior Member
iTrader: (12)
I have a 5" lip for my rear wheels, front is 4.5" (I don't have a picture of front fitment being my car doesnt have the subframe mounted) I may be creating a new thread regarding fitment issues I may run into. Here are some pictures of the rear wheels mounted on the car with no suspension. Do these cars have a factory rear camber adjustment?
All four wheels originally where 17x7 +45, after replacing the outer lips only the fronts now are 9" wide and rear 9.5" wide
All four wheels originally where 17x7 +45, after replacing the outer lips only the fronts now are 9" wide and rear 9.5" wide
#704
Bridge Burner.
iTrader: (13)
I have a 5" lip for my rear wheels, front don't have a picture of front fitment being my car doesnt have the subframe mounted) I may be creating a new thread regarding fitment issues I may run into. Here are some pictures of the rear wheels mounted on the car with no suspension. Do these cars have a factory rear camber adjustment?
All four wheels originally where 17x7 +45, after replacing the outer lips only the fronts now are 9" wide and rear 9.5" wide
All four wheels originally where 17x7 +45, after replacing the outer lips only the fronts now are 9" wide and rear 9.5" wide
We'll help as much as possible, but wide is probably your best bet.
The fronts are a whole different story. I'd start shopping for wide fronts if i were you, unless you like fixing them daily. I run 17x9+4 up front and my tire grabs my fender and bends it inwards all the time. Unless you run insane camber, you'll need wide fenders.
Sorry for all the bad news
#705
Senior Member
iTrader: (12)
Thanks for the info, I have had my eye on shines front and rear wide fenders, once i get the subframe on I'm sure figure out what needs to be done. I noticed Shines wide fenders are 30mm, is there anything that has less width and vert friendly? I'm looking foward to getting the wheels fitted, it should look pretty good once done.
You need to buy a camber adjustment bar. Mazdatrix has them for a reasonable price. But either way you are going to have MAJOR issues. 17x9.5 -18.5!?!? You're ****** nuts dude. You'll probably need to go wide unless you Pull the living **** out of you're guards. Like PULL THE **** OUT IF THEM. 17x9.5 ++++15!!! Needs a hard pull, let alone minus ******* 18!!!
We'll help as much as possible, but wide is probably your best bet.
The fronts are a whole different story. I'd start shopping for wide fronts if i were you, unless you like fixing them daily. I run 17x9+4 up front and my tire grabs my fender and bends it inwards all the time. Unless you run insane camber, you'll need wide fenders.
Sorry for all the bad news
We'll help as much as possible, but wide is probably your best bet.
The fronts are a whole different story. I'd start shopping for wide fronts if i were you, unless you like fixing them daily. I run 17x9+4 up front and my tire grabs my fender and bends it inwards all the time. Unless you run insane camber, you'll need wide fenders.
Sorry for all the bad news
#707
Bridge Burner.
iTrader: (13)
EDIT: okay i made a mistake. The rears should be around +8.. Very possible the fronts should be ~+19?? Looks like you got some perfect offsets. Again i could be wrong,.I'm drinking and cant math right now hahaha
Last edited by beachFC; 03-09-13 at 10:51 PM.
#709
Senior Member
iTrader: (12)
thanks for he info beach, I just measured rear barrel and it's 4.5"( I also measured from the face of the wheel to the edge of the outer lip and fronts I got 4.5" and rear 5") Just eye balling the rear I hope there's enough camber and work I can work with the factory body.
#713
Insane Stance and Offset
D2 RS Spec Coilovers (not even close to being maxxed)
17x9.5 +12 w/5 mil spacer(f)/17x10 +15 w/15 mil bolt on spacer(r) Work VS-XX's
tire size- 205/40r17 all the way around
17x9.5 +12 w/5 mil spacer(f)/17x10 +15 w/15 mil bolt on spacer(r) Work VS-XX's
tire size- 205/40r17 all the way around
#717
Lugcentric 15x8 Gamblers, 195/55 fronts, 205/60 rears, 25.4 offset with 3/4 inch spacers for a total of + 6.35 offset. 3.5 inch ARP studs. Nothing's hubcentric, and there are no vibrations.
#722
Insane Stance and Offset
#724
X MARKS THE SPOT
iTrader: (7)
Join Date: Feb 2009
Location: south gate
Posts: 734
Likes: 0
Received 0 Likes
on
0 Posts
it wasnt lower, i had just got done driving it. lol. and if i were to max them out my car would literally not move. the fender edges would be sitting on the lip of the wheels and the tires would me mashed against the inner fenders lol. im close to that point as it is haha. and i also daily my 7 and im in the air force and he have these MASSIVE speedbumps coming onto base. i already have to come in at a stupid angle and i scpare from my lip to my exhaust tip lol
#725
Senior Member
iTrader: (4)
Join Date: Jul 2007
Location: simpsonville, sc
Posts: 447
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Screamin FC;11413343]D2 RS Spec Coilovers (not even close to being maxxed)
17x9.5 +12 w/5 mil spacer(f)/17x10 +15 w/15 mil bolt on spacer(r) Work VS-XX's
tire size- 205/40r17 all the way around
Welcome to the forums/thread Ryan! glad to see you put the wheels on the FC!
17x9.5 +12 w/5 mil spacer(f)/17x10 +15 w/15 mil bolt on spacer(r) Work VS-XX's
tire size- 205/40r17 all the way around
Welcome to the forums/thread Ryan! glad to see you put the wheels on the FC!