Pic Request: fc fmic set up
#30
is that a wankel.
iTrader: (14)
as far as the wheels they are xxr 521 18x8.5 +25 fronts and 18x10 +20 rears
The following users liked this post:
Grevider (02-02-23)
#34
T2 Duo!
iTrader: (6)
I'll share a picture of mine. Its a highly modified rotary works kit. Kit was garbage, hence the need to have a professional shop modify it. I would highly recommend considering the rotary extreme kit if you are considering getting a vmount. Be aware that the cost of a proper vmount will be higher than any fmic.
https://www.rx7club.com/group-buy-pr...ghlight=vmount
vmount finished and in the car before engine taken out for rebuild and overhaul (still working on it)
https://www.rx7club.com/group-buy-pr...ghlight=vmount
vmount finished and in the car before engine taken out for rebuild and overhaul (still working on it)
#37
I'll share a picture of mine. Its a highly modified rotary works kit. Kit was garbage, hence the need to have a professional shop modify it. I would highly recommend considering the rotary extreme kit if you are considering getting a vmount. Be aware that the cost of a proper vmount will be higher than any fmic.
yea im planning on spending about 15k on my car but want to keep it looking as stock as possible. I will be doing most of the work myself but the metal work will be done by a shop. thanks for the pics cant wait to see more of it
#38
T2 Duo!
iTrader: (6)
Ditch the oem fan, put an intercooler where the radiator is and move the radiator forwards. The intercooler and radiator should be sandwiched together. Should only require some simple brackets and trimming of radiator hoses. Then have a professional shop make your charge pipes. This will keep it stock looking, and yield similar response to a vmount due to its short piping. Just remember that the radiator and intercooler must be sandwiched with no gap otherwise air will not push through the radiator well. Done.
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM