Anyone down to help me modernize my tail lights???
#2
Whipping thru traffic.
iTrader: (12)
Join Date: Nov 2008
Location: In a box.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
They're easy to do. Read up on the tutorials around here. I did mine the 1st time and they turned out perfect.
Here's the thread I used -> https://www.rx7club.com/showthread.p...ed+tail+lights
I didn't use epoxy though. I just reheated the housing when I was ready to put the lens back on and the original glue was still there and made a tight seal.
Oven = 300
Took out all screws and the foam strip (used gorilla glue to put foam back after modernize).
Put tail on pizza pan (the screws touching the pan, not the plastic).
5 minutes and checked them (left in for 10 though).
Took them out and pulled them apart very slowly/carefully.
After the insert was out I put the main part of the tail back in the oven for about 5-10 minutes @ 300 again.
Pulled it out and carefully pressed the lens back to the main part of the tail.
I'm no pro. But my tails look perfect to me.
Here's the thread I used -> https://www.rx7club.com/showthread.p...ed+tail+lights
I didn't use epoxy though. I just reheated the housing when I was ready to put the lens back on and the original glue was still there and made a tight seal.
Oven = 300
Took out all screws and the foam strip (used gorilla glue to put foam back after modernize).
Put tail on pizza pan (the screws touching the pan, not the plastic).
5 minutes and checked them (left in for 10 though).
Took them out and pulled them apart very slowly/carefully.
After the insert was out I put the main part of the tail back in the oven for about 5-10 minutes @ 300 again.
Pulled it out and carefully pressed the lens back to the main part of the tail.
I'm no pro. But my tails look perfect to me.
#3
INNOVATOR NOT IMITATOR
Thread Starter
iTrader: (11)
Join Date: Jul 2009
Location: LA 626
Posts: 1,254
Likes: 0
Received 0 Likes
on
0 Posts
i would do it myself but i dont want to mess up haha.. i rather let someone else who knows what they are doing do it for me or atleast be there to help me...
or is anyone down to trade their mondernized s5 tails lights for my stock ones.. mine are in perfect conditon no cracks no scratches or heat marks..... that way they can just do it again haha
or is anyone down to trade their mondernized s5 tails lights for my stock ones.. mine are in perfect conditon no cracks no scratches or heat marks..... that way they can just do it again haha
#6
INNOVATOR NOT IMITATOR
Thread Starter
iTrader: (11)
Join Date: Jul 2009
Location: LA 626
Posts: 1,254
Likes: 0
Received 0 Likes
on
0 Posts
^^ thanks ill be sure to ask you a few questions when i get a 2nd set of tails for a retrofit led conversion... im pretty good with soldering just need stable hands for it haha..