S5 turbo on s4 engine questions
05-01-20, 06:50 PM
#1
Junior Member
Thread Starter
S5 turbo on s4 engine questions
Been searching but I can’t find the info I need.
fresh rebuilt 87 tii swap, everything blocked off,
stock ecu
bought a s5 turbo because the fan blades contacted the housings in the s4 turbo and was leaking and burning off oil from where chra mates to hot side housing. I know I need to use s4 oil, coolant lines and s4 actuator on the new turbo but There’s a secondary and larger wastegate actuator on the s5 turbo and I’m not sure what should be connected to it. Vac from intake?
Also is porting the wastegate essential?
Do I need FCD?
do I need an electronic boost controller for the s5 turbo?
is .3mm radial play on the turbo okay? No in/out play
fresh rebuilt 87 tii swap, everything blocked off,
stock ecu
bought a s5 turbo because the fan blades contacted the housings in the s4 turbo and was leaking and burning off oil from where chra mates to hot side housing. I know I need to use s4 oil, coolant lines and s4 actuator on the new turbo but There’s a secondary and larger wastegate actuator on the s5 turbo and I’m not sure what should be connected to it. Vac from intake?
Also is porting the wastegate essential?
Do I need FCD?
do I need an electronic boost controller for the s5 turbo?
is .3mm radial play on the turbo okay? No in/out play
Thread
Thread Starter
Forum
Replies
Last Post
1SWEET7
2nd Generation Specific (1986-1992)
32
08-21-09 10:26 AM
Rotaryrockstar
2nd Generation Specific (1986-1992)
1
10-20-05 11:23 PM