Help! Check engine light code 13 (map) fix?
#1
Newbie
Thread Starter
Join Date: Mar 2023
Location: Wichita kansas
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Help! Check engine light code 13 (map) fix?
Hello I have a 1991 RX7 FC convertible bones stock no modificatiand every time I drive it and give it a decent amount of throttle it cuts out and I get a check engine light so I checked the codes and I got 13 and I looked it up and it said it was the map sensor so I replaced the sensor And I'm still getting the same problem so then I checked the voltage Of the wires going into the connector going into the sensor and I know that the green and yellow wire should be 3.4 to 3.6 Volts but it's 1.3 volts when the car is warm and the vacuum line is plugged I also checked with the vacuum line unplugged and it was still the same when the car was warmed up and I checked the other wire I believe it was the Brown-and-white one And it was at 5 V and I don't know if that means my issue is acting up or what?
Thread
Thread Starter
Forum
Replies
Last Post
Seven!!
General Rotary Tech Support
2
02-23-06 07:50 PM
P'cola FD
3rd Generation Specific (1993-2002)
3
05-06-02 08:39 AM