Hey all, anyone who has their 20b running on an E6k, i need to know what the pinouts for the cas and the tps are. The CAS looks like the one I used to have on my T2, but the TPS looks a lot like the FD one that I have sitting in the garge. So, if anyone has the pinouts and what to wire where, please let e know ASAP.

I THINK that I have the rest of the stuff hooked up correctly, but I guess we'll see soon enough

 

the cas is the same as an fc (you could use the fc one too). the prs is the same as an fd, even the wire colors were the same as fd.

mike

 

cool, so I was pretty close on guessing

She may be runnin today boys...

 

cool... keep us updated... Video tape the first startup

 

well, no luck this weekend with getting it running...

However, I did get the entire haltech syste, wired up with help from zach. Jist need to make oil cooler lines and a couple of other small things and its ready to go... hopefully tomorrow (Tuesday the 20th).

 

OK, about this TPS pinout thing.... I found the wiring schmatic for an FD at http://www.ricemobile.net/haltech/wiring.htm . It lists the following:

• Mazda TPS - Brown Black = Haltech Harness - Black
• Mazda TPS - Black / Green = Haltech harness - White
• Mazda TPS - Brown / White = Haltech Harness - Orange

Problem.... the Mazda TPS has 4 wires coming out of it, but they don't match up with those wire colors.... there is a Brown black one, a Brown White one, A Black/Red one and a Green/red one... Do I wire the black/red and the Green/red to the Haltech White? Or just one of them, and if one of them, which one? What do I do with the other wire?