I figured i should share how my project is going with the rest of the class
#1
Rest In Peace Dave
Thread Starter
Join Date: Feb 2004
Location: Idaho
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
I figured i should share how my project is going with the rest of the class
Well some of you may remember that I ran my car n/a last year and I did have my fun with it. I started tearing it apart in december and I slowly started picking away at it. I'm getting close to projects end now. Heres some pictures
Tearing it apart from every angle
Decided to chip out the sound deadening up front
Intercooler mock up and mount
Test fitting the new turbo off the car
I'll be running 4" to dual 3"
Getting most of the interior finalized
Coil pack setup
Starting to get into the wiring
Starting to look more like a car
Tearing it apart from every angle
Decided to chip out the sound deadening up front
Intercooler mock up and mount
Test fitting the new turbo off the car
I'll be running 4" to dual 3"
Getting most of the interior finalized
Coil pack setup
Starting to get into the wiring
Starting to look more like a car
#3
Senior Member
iTrader: (5)
Are you using the stock NA hood ? Did you have to cut it ? What kind of engine mounts did you use ? Did you have to make custom oil pan or new sub-frame or move the steering rack ?
Looks great. Similar to my car (color and wheels) except for the 20B. I only have the smaller version of the cosmo engine.
Looks great. Similar to my car (color and wheels) except for the 20B. I only have the smaller version of the cosmo engine.
#6
Rest In Peace Dave
Thread Starter
Join Date: Feb 2004
Location: Idaho
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
#7
Rest In Peace Dave
Thread Starter
Join Date: Feb 2004
Location: Idaho
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Yes and Yes
I fabed my own
No, no, and no....well i did have to modify the rack a bit
Thanks! I love the bronze on white look.
What kind of engine mounts did you use ?
Did you have to make custom oil pan or new sub-frame or move the steering rack ?
Looks great. Similar to my car (color and wheels) except for the 20B. I only have the smaller version of the cosmo engine.
Trending Topics
#8
Rest In Peace Dave
Thread Starter
Join Date: Feb 2004
Location: Idaho
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
#9
Rest In Peace Dave
Thread Starter
Join Date: Feb 2004
Location: Idaho
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
#11
Rest In Peace Dave
Thread Starter
Join Date: Feb 2004
Location: Idaho
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
A little update
Getting the wastegate mocked up
Getting the downpipe tack welded
-10 to dual -8's. I know its a little extreme for my current goals, but it will give me a lot of room to grow.
New fittings waiting to be welded onto the fuel rail
Getting the wastegate mocked up
Getting the downpipe tack welded
-10 to dual -8's. I know its a little extreme for my current goals, but it will give me a lot of room to grow.
New fittings waiting to be welded onto the fuel rail
Last edited by bcool; 05-30-07 at 02:50 AM.
#16
Rotary Apprentice
Join Date: Jan 2005
Location: USA
Posts: 2,181
Likes: 0
Received 0 Likes
on
0 Posts
#23
Rest In Peace Dave
Thread Starter
Join Date: Feb 2004
Location: Idaho
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
Haha, i had no idea our projects were that much alike. Great minds think alike. I expect to have it in one solid mechanical peice here in about 2 weeks. Then its up to wiring. I WILL have this done for Sevenstock X.