turbo specs?
|
Are you using the stock NA hood ? Did you have to cut it ? What kind of engine mounts did you use ? Did you have to make custom oil pan or new sub-frame or move the steering rack ?
Looks great. Similar to my car (color and wheels) except for the 20B. I only have the smaller version of the cosmo engine. |
wastegate screamer shooting out the top of your hood? hehe
|
Which EFI system are you planning to use?
|
Originally Posted by allrotor93
(Post 6961504)
turbo specs?
Turbine Wheel: ( GT45 SPEC ) Exducer: 3.05" Mayor : 3.46" Compressor Wheel Exducer: 2.56" Mayor : 3.90" Turbine Housing: 1.05 |
Originally Posted by FD3S_wanted
(Post 6963221)
Are you using the stock NA hood ?
Did you have to cut it ? What kind of engine mounts did you use ? Did you have to make custom oil pan or new sub-frame or move the steering rack ? Looks great. Similar to my car (color and wheels) except for the 20B. I only have the smaller version of the cosmo engine. |
Originally Posted by Node
(Post 6963595)
wastegate screamer shooting out the top of your hood? hehe
|
Originally Posted by voodooracing
(Post 6963605)
Which EFI system are you planning to use?
|
It looks nice...
|
A little update
Getting the wastegate mocked up http://myweb.cableone.net/mjbless/project/37.jpg Getting the downpipe tack welded http://myweb.cableone.net/mjbless/project/38.jpg http://myweb.cableone.net/mjbless/project/39.jpg http://myweb.cableone.net/mjbless/project/49.jpg http://myweb.cableone.net/mjbless/project/41.jpg -10 to dual -8's. I know its a little extreme for my current goals, but it will give me a lot of room to grow. http://myweb.cableone.net/mjbless/project/42.jpg New fittings waiting to be welded onto the fuel rail http://myweb.cableone.net/mjbless/project/44.jpg |
Who built your manifold? I need one for the FC!
|
are you gonna keep the gate open? or put it back into the exhaust? if you put it into the exhaust, i hate you. looks good so far though, the manifold is very sexy.
|
no, it will be atmosphere dump
|
loving this project gaining loads of information
keep it coming |
Originally Posted by bcool
(Post 7010757)
no, it will be atmosphere dump
|
looking pretty damn good.
|
how much did the engine set you back?
|
Just got the exhaust finished on it. 4" split into dual 3"
http://myweb.cableone.net/mjbless/meat/14.jpg http://myweb.cableone.net/mjbless/meat/15.jpg http://myweb.cableone.net/mjbless/meat/16.jpg http://myweb.cableone.net/mjbless/meat/17.jpg http://myweb.cableone.net/mjbless/meat/18.jpg http://myweb.cableone.net/mjbless/meat/19.jpg http://myweb.cableone.net/mjbless/meat/20.jpg http://myweb.cableone.net/mjbless/meat/21.jpg |
Looks great, congrats!
|
It looks great, keep us posted.
|
dude your project is like deja-vu to me.
same wastegate, same style exhaust, same radiator, same coil setup, same intercooler, same fuel rails, etc etc. that said, looks pretty sweet man! when do you expect to have it up and running? specs on the turbo? |
Originally Posted by patman
(Post 7195014)
dude your project is like deja-vu to me.
same wastegate, same style exhaust, same radiator, same coil setup, same intercooler, same fuel rails, etc etc. that said, looks pretty sweet man! when do you expect to have it up and running? specs on the turbo? Haha, i had no idea our projects were that much alike. Great minds think alike. I expect to have it in one solid mechanical peice here in about 2 weeks. Then its up to wiring. I WILL have this done for Sevenstock X. |
Brendan, that's looking quite pretty! Can't wait to take a ride in the finished product around christmas! I BETTER anyway. lol
|
looks like a little custom work on the swaybar??? how is it working out for you?
http://myweb.cableone.net/mjbless/project/27.jpg |
All times are GMT -5. The time now is 10:33 AM. |
© 2024 MH Sub I, LLC dba Internet Brands